D26.10-1149-09
Shown on model 909.843 |
1 | Transmission | 10 | Engine cross member | |
5 | Propeller shaft | 11 | Engine mount | |
6 | Hydraulic hose | G3 | Tachograph travel distance and speed sensor | |
7 | Hydraulic line | S19 | Backup lamp switch | |
8 | Bracket |
D26.10-1150-08
Shown on vehicle with code MS9(Engine version EURO 4) |
1 | Transmission | 13 | Bracket | |
12 | Bracket | 14 | Bracket |
D26.10-1151-07
Shown on vehicle with code MP5 (Engine version Euro 5) |
1 | Transmission | 12 | Bracket | 14 | Bracket |
1 | Transmission |
2 | Support plate |
3 | Major assembly mount |
4 | Oil filler plug |
D26.10-1148-06
Danger | Risk of fire/risk of explosion due to short circuit and escaping oxyhydrogen gas. Risk of (burn) injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte/mist, short circuit and arcing. Risk of poisoning caused by swallowing battery electrolyte or absorption of lead through the skin or body orifices. Risk of death due to voltage U >= 30 V AC and U >= 60 V DC. | No fires, sparks, open flames, or smoking. Wear acid-resistant gloves, clothing, and glasses. Pour battery acid only into suitable and appropriately marked containers. | |
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Warning | Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. | No parts of the body or limbs should be within the operating area of mechanical components when moving components. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Caution | Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil | Wear protective gloves, protective clothing and safety glasses. | |
Caution | Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid | Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. | |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Topical note | Brake fluid notes | ||
Topical note | Notes on self-locking nuts and bolts | ||
Topical note | Notes on battery | ||
| Remove | ||
1 | Disconnect ground line from battery. | ||
2 | Extract brake fluid from brake fluid reservoir. | ||
3 | Raise vehicle and fix in place on vehicle lift. | ||
4 | Drain fluid from transmission. | If the transmission (1) is replaced or repair work is conducted on the transmission (1). | |
| |||
5.1 | Secure propeller shaft (5) in area of transmission (1) and propeller shaft intermediate bearing against falling down. | Transmission 711.680/683 in model 909 | |
5.2 | Secure propeller shaft (5) in area of transmission (1) and propeller shaft intermediate bearing against falling down. | Transmission 711.680/683 in model 909 | |
6.1 | Remove propeller shaft intermediate bearings. | Transmission 711.680/683 in model 909 | |
6.2 | Remove propeller shaft intermediate bearing. | Transmission 711.680/683 in model 909 | |
7 | Remove check strap of propeller shaft (5). | ||
8 | Remove propeller shaft (5) from transmission (1) and attach at side to substructure. | ||
9 | Remove shift cables from transmission (1). | ||
Long-life grease | |||
10 | Release and disconnect electrical connector from backup light switch (S19). | ||
11 | Detach tachograph travel distance and speed sensor (G3) from transmission (1) and fasten to side of substructure. | Transmission 711.680/683 in model 909 | |
12 | Pull out safety clip at separation point (arrow) of clutch operation. | ||
13 | Remove hydraulic hose (6) from hydraulic line (7). | ||
14 | Seal connections with suitable stop plugs. | Record plug | |
15 | Remove holder (8). | ||
16 | Remove bracket (12). | Transmission 711.680 in model 909 | |
17 | Position major assembly mount (3) with support plate (2) on transmission (1). | ||
| 000 588 10 62 00 Support plate | ||
| 000 588 11 62 00 Major assembly mount | ||
18 | Secure transmission (1) using suitable means to support plate (2). | ||
19 | Use suitable means to prop up engine between oil pan and front axle carrier. | ||
20 | Remove engine crossmember (10) together with engine mount (11). | ||
21 | Remove holder (14) and place to one side. | ||
22 | Remove holder (13). | Transmission 711.683 in model 909 | |
23 | Remove remaining bolts of transmission (1) on engine. | Note different lengths of bolts, mark installation locations if necessary. | |
24 | Remove transmission (1) from engine, move out to the rear and lower. | ||
| 000 588 11 62 00 Major assembly mount | ||
| 000 588 10 62 00 Support plate | ||
Aid of helper required. | |||
| Check | ||
25 | Perform visual check on central clutch release bearing. | ||
Notes on working on central clutch release bearing of transmission | |||
If a problem is detected, | |||
| |||
replace central clutch release bearing. | |||
26 | Check intermediate rubber layer on holder (8). | If wear or damage is detected, | |
| |||
install new holder (8). | |||
| Install | ||
27 | Move transmission (1) forward and position on engine. | ||
| 000 588 11 62 00 Major assembly mount | ||
| 000 588 10 62 00 Support plate | ||
Aid of helper required. | |||
28 | Tighten two bolts on opposite sides of transmission (1) lightly by hand. | ||
29 | Mount holder (14). | Screw/bolt, manual transmission to engine | |
30 | Install holder (12). | Transmission 711.680 in model 909 | |
Nut/bolt, bracket to front exhaust system | |||
Screw/bolt, manual transmission to engine | |||
31 | Install holder (13). | Transmission 711.683 in model 909 | |
Screw/bolt, manual transmission to engine | |||
32 | Tighten remaining bolts of transmission (1). | Screw/bolt, manual transmission to engine | |
33 | Install engine crossmember (10) together with engine mount (11). | ||
34 | Remove support between oil pan and front axle carrier. | ||
35 | Release transmission (1) from support plate (2) and move out major assembly mount (3). | ||
| 000 588 11 62 00 Major assembly mount | ||
| 000 588 10 62 00 Support plate | ||
36 | Install holder (8). | Nut, bracket to catalytic converter | |
Bolt, exhaust bracket to transmission and exhaust | |||
37 | Remove stop plugs. | Record plug | |
38 | Check sealing ring of hydraulic line (7). | If damage is detected on the sealing ring of the hydraulic line (7), | |
| |||
replace hydraulic line (7). | |||
M61 | |||
39 | Connect hydraulic hose (6) to hydraulic line (7). | ||
40 | Attach safety clip of separation point (arrow). | ||
41 | Check sealing ring of tachograph travel and speed sensor (G3). | Transmission 711.680/683 in model 909 | |
If damage is detected on the sealing ring of the tachograph travel and speed sensor (G3), | |||
| |||
replace sealing ring of the tachograph travel and speed sensor (G3). | |||
42 | Mount tachograph travel distance and speed sensor (G3) to transmission (1). | Transmission 711.680/683 in model 909 | |
Transmission 711.680/683 in model 909 | |||
43 | Connect electrical connector to backup lamp switch (S19). | ||
44 | Mount shift cables onto transmission (1). | ||
Long-life grease | |||
45 | Mount propeller shaft (5) onto transmission (1). | ||
46 | Install check strap of propeller shaft (5). | Bolt, retaining bracket to frame floor assembly | |
47.1 | Mount propeller shaft intermediate bearings. | Transmission 711.680/683 in model 909 | |
Screw/bolt, propeller shaft center support bearing to frame floor assembly | |||
47.2 | Mount propeller shaft intermediate bearing. | Transmission 711.680/683 in model 909 | |
Screw/bolt, propeller shaft center support bearing to frame floor assembly | |||
48 | Remove attached retainer for preventing propeller shaft (5) from dropping down. | ||
| Check | ||
49 | Fill transmission with oil. | If the transmission (1) is replaced or repair work is conducted on the transmission (1). | |
| |||
50 | Correct brake fluid level in brake fluid reservoir. | ||
51 | Connect ground line to battery. | ||
52 | Bleed clutch operating system. | ||
53 | Unscrew oil filler screw (4), check transmission oil level and correct if necessary. | The automatic transmission fluid must be level with the filler hole. | |
Transmission 711.680 in model 909 | |||
Filling screw | |||
54 | Check coupling for proper operation. | ||
55 | Check gearshift system and shift cables for ease of movement. | If the transmission (1) does not shift easily through the gears, | |
| |||
adjust shift cables. | |||
Warning | Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust. | Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area. | |
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
56 | Perform engine test run and check transmission (1) for leak tightness and proper operation. | ||
57 | Lower vehicle and release from vehicle lift. |
Manual transmission |
Number | Designation | Transmission 711.68 (except 711.683) in model 909 | Transmission 711.683 in model 909 | ||
BF26.00-N-1001-01A | Gear oil | Filling capacity | Liter | 2,1 | 2,1 |
with PTO | Liter | 2,6 | – | ||
with additional drive system | Liter | – | – | ||
Sheet | |||||
Sheet | - | - | |||
129 589 00 91 00
Record plug
เอกสารที่อ้างถึง
- ah0000n000101a
- ah2640n100101s
- ah4250p000101a
- ah5400p000101a
- ah5410p000101a
- ah5410p000101a
- ap2600d2601r
- ar0060d0100f
- ar2210d1170r
- ar2520d0070r
- ar2520d0180r
- ar2660d662601r
- ar2660d6633r
- ar4110d0050r
- as0000z000501a
- as0000z000901a
- as0000z001001a
- as0000z001701a
- as0040z000101a
- as4250z000101a
- as4900z000101a
- as5410z000101a
- ws0100p0092b
- ws2600p3309b