1 | Filling screw |
2 | Drain screw |
D26.10-A000-01
| Clean | ||
1 | Lift vehicle, jack up. | ||
| |||
2 | Clean area around the filler screw (1) and drain screw (2). | ||
3 | Position suitable receptacle under the drain screw (2). | ||
Draining | |||
4 | Remove filling screw (1) and drain screw (2). | Clean drain screw magnet (2). | |
5 | Drain fluid from transmission. | ||
6 | Screw in drain screw (2). | Replace sealing ring on oil drain screw (2). Apply light coating of oil to thread. | |
Drain screw | |||
Filling | |||
7 | Fill transmission with oil. | Observe specified filling quantity. On transmissions with power take-off the specified filling capacity does not reach the bottom edge of the oil filler opening. | |
Gear oil | |||
8 | Screw in filling screw (1). | Apply light coating of oil to thread here. | |
Filling screw | |||
9 | Confirm conducted operations in maintenance booklet or in Digital Service Booklet (DSB). |
Manual transmission |
Number | Designation | Transmission 711.68 (except 711.683) in model 909 | Transmission 711.683 in model 909 | ||
BF26.00-N-1001-01A | Gear oil | Filling capacity | Liter | 2,1 | 2,1 |
with PTO | Liter | 2,6 | – | ||
with additional drive system | Liter | – | – | ||
Sheet | |||||
Sheet | - | - | |||