Shown on model 470 with engine 699 with code ZG3 (Engageable all-wheel drive with transmission ratio) |
1 | Clutch pressure plate |
2 | Clutch plate |
3 | Flywheel |
S25.10-4503-11
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
| Remove | ||
1 | Remove manual transmission. |
| |
Model 470 with engine 200 with transmission 700.780 | |||
2 | Remove clutch pressure plate (1) and clutch plate (2). | ||
| Check | ||
3 | Check clutch pressure plate (1) and clutch plate (2) for wear and damage. | ||
Assembly cleaner | |||
If corresponding findings are present, | |||
| |||
replace affected components. | |||
4 | Check flywheel (3) for wear and damage. | If corresponding findings are present, | |
| |||
install new flywheel (3). | |||
| |||
| |||
5 | Remove release bearing and check for wear and damage. | ||
If corresponding findings are present, | |||
| |||
Replace release bearing. | |||
| Install | ||
6 | Install release bearing. | ||
7 | Clean contact surface for clutch plate (2) at flywheel (3). | Assembly cleaner | |
8 | Install clutch pressure plate (1) and clutch plate (2). | ||
Bolt, clutch pressure plate to flywheel | |||
Molykote BR 2 plus grease | |||
Alignment tool | |||
9 | Install manual transmission. |
| |
Model 470 with engine 200 with transmission 700.780 |
000 589 47 31 00
Alignment tool