S25.20-4527-08
Shown on model 470 with engine 699 code ZG3 (Engageable all-wheel drive with transmission ratio) |
1 | Protective boot | 4 | Guide tube | 7 | Spring | ||
2 | Release lever | 5 | Release bearing | 8 | Spring | ||
3 | Ball head | 6 | Guide tube |
| Remove | ||
1 | Remove manual transmission. |
| |
Model 470 with engine 200 with transmission 700.780 | |||
2 | Remove protective boot (1). | ||
3 | Remove release lever (2) from ball head (3). | ||
4 | Remove release lever (2) with guide tube (4) and release bearing (5) from guide tube (6). | ||
5 | Unlock spring (7) from release lever (2) and remove guide tube (4) with release bearing (5). | ||
| Clean | ||
6 | Clean release lever (2) and guide tube (4). | | |
Assembly cleaner | |||
| Check | ||
7 | Check release bearing (5) for damage and wear. | If corresponding findings are present, | |
| |||
Replace release bearing(5). | |||
Commercially available devices/tools | |||
Tool kit | |||
Installation tool | |||
8 | Check springs (7, 8) for damage and deformation. | If corresponding findings are present, | |
| |||
Replace springs (7, 8). | |||
| Install | ||
9 | Apply thin coating of lubricant to contact surfaces of release lever (2) and guide tube (4). | Molykote BR 2 plus grease | |
10 | Position guide tube (4) with release bearing (5) at release lever (2) and engage spring (7) in release lever (2). | ||
11 | Position release lever (2) with guide tube (4) and release bearing (5) on guide tube (6). | ||
12 | Engage release lever (2) at ball head (3). | ||
13 | Install protective boot (1). | ||
14 | Install manual transmission. |
| |
Model 470 with engine 200 with transmission 700.780 |
700 589 06 43 00
Installation tool
700 589 08 63 00
Tool kit