ap8210p8260a

Check and correct the adjustment of the headlamps

ประเภท ap · หัวข้อ 82.10 · เวอร์ชัน 0123 · 2019-11-27

ใช้กับ: Model 124, 129, 140, 202 Model 170, 208, 210 except code 491 (US version)

ไม่มีใน “th” แสดงเป็น อังกฤษ

ตำแหน่ง

กลุ่มฟังก์ชัน 3 Body › 82 Electrical system, body › 82.10 Exterior lights — ซีรีส์ 124 · ซีรีส์ 129 · ซีรีส์ 140 · ซีรีส์ 170 · ซีรีส์ 202 · ซีรีส์ 208 · ซีรีส์ 210

EinPAS 30 Lighting system › 30.15 Exterior lights › 30.15.40 Headlamp — ซีรีส์ 124 · ซีรีส์ 129 · ซีรีส์ 140 · ซีรีส์ 170 · ซีรีส์ 202 · ซีรีส์ 208 · ซีรีส์ 210

AP82.10-P-8260A

Check and correct the adjustment of the headlamps

19.11.2019

Model

124, 129, 140, 202

Model

170, 208, 210

except code 491 (US version)

Check and correct the adjustment of the headlamps

Model 124T, model 129T, model 140 (up to approx. 02.94), model 202 (sedan up to approx. 05/96), model 140 (as of approx. 03.94), model 170, model 202 (sedan as of approx. 06/96 and T-sedan)

a

Marking for low beam/high beam

c

Marking for fog light or model 124.036 high beam headlamp

a

Marking for low beam/high beam

a

Marking for low beam

b

Marking for high beam

c

Marking for fog light (except coupe)

a

Marking for low beam

b

Marking for fog light (except coupe model 140 and model 170)

c

Marking for high beam

P82.10-0212-02

Check

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

Danger

Risk of explosion/risk of fire caused by highly flammable materials in the vicinity of damaged xenon bulbs. Risk of injury caused by UV light, hot components on xenon headlamps and glass splinters produced by bursting xenon bulbs. Risk of poisoning caused by inhalation of mercury vapors and by swallowing of/skin contact with toxic salts and mercury compounds.

Do not touch parts conducting high voltage. Persons with active electronic implants (e.g. cardiac pacemakers) must never work on xenon headlamps. Switch off the entire lighting system. Wear insulated safety shoes, safety glasses and protective gloves. Remove highly inflammable materials from the danger zone. Ensure sufficient ventilation in the working area.

AS82.10-Z-0001-01A

1

Check tire pressure, correct if necessary

2

Park the vehicle on a horizontal, level surface

Vehicle must be in curb condition (curb weight, fuel tank full or corresponding additional weight).

The vehicle level must not change when the brakes are operated.

3

Occupy driver seat with a person or load the seat with 75 kg

Except vehicles with code 491 (USA version) or vehicles with level control system or ADS

4

Run engine at moderate speed for approx. 30 s

On vehicles with level control system or ADS.
Move vehicle forward and backward to enable the axle to be adjusted.

5.1

Align headlamp adjuster with vehicle and set height according to markings in lens

Model 124, 129, 140, 170, 202

Precisely observe operating instructions for headlamp adjustment testing unit.

Commercially available devices/tools:
Headlamp aimer

5.2

Align headlamp adjuster with vehicle and set height according to center of lens

MODEL 170, 208, 210

Precisely observe operating instructions for headlamp adjustment testing unit.

Commercially available devices/tools:
Headlamp aimer

6

Run engine and switch on low beam

7.1

Check headlamp range control for proper function

With standard headlamps.

Except vehicles with code 491 (USA version)

Model 124
ra82001244011x RA82-4011
Model 140
ra820b1404011x RA82-4011

The light beams from both headlamps should adjust uniformly. Headlamp range adjustment nonfunctional:

Check pneumatic headlamp range adjustment


Model 129

AR82.10-P-4011A


Model 170, 202, 210

AR82.10-P-4011EA

7.2

Check headlamp range adjustment for proper operation through placement of additional weights in the luggage compartment

With xenon headlamps.

Electric headlamp range adjustment (HRA) diagnosis, function check

Models 202, 208, 210

AD82.10-P-3000A

Model 129, 140
dh0103pa00011x Body, Volume 1 – Squ 1.3

8.1

Set headlamp range adjustment switch to 0

With standard headlamps.

8.2

Remove additional weight

With xenon headlamps.

With xenon headlamps.

9

Check low beam and adjust if necessary


On vehicles except code 491 (USA version)

AP82.10-P-8260-01A

Model 129, 140, 202 with code 491 (USA version) up to approx. 03/96

AP82.10-P-8260-01B

Modified lamp unit

Model 140

BT82.10-P-9403-01Z

Location of fog lamps and high beams reversed in headlamp unit

Model 202Sedan

BT82.10-P-0001-01A

The common reflector unit on model 140 sedan as of approx. 03.94 and model 202 also adjusts low beam, remote and fog light.
Since low beam and high beam share the same reflector unit on model 170, they are adjusted simultaneously.

Vehicles with code 491 (USA version) model 210 and 208, 129, 140, 170, 202 as of approx. 04/96, model 210:

See owner's manual.

10.1

Check high beam adjustment

High beam adjustment

AP82.10-P-8260-02A

10.2

Check high beam headlamp adjustment

High beam headlamp adjustment

Model 124.036

AP82.10-P-8260-03A

11

Check fog light

AP82.10-P-8260-04A

เอกสารที่อ้างถึง