1 | Drain screw |
2 | Screw |
3 | Cover |
4 | Sealing ring |
5 | Sealing ring |
6 | Oil filter |
N27.00-2006-11
Dipstick with cold and hot measuring range |
A | Hot measuring range (70 °C to 90 °C) |
B | Cold measuring range (20 °C to 30 °C) |
N27.00-2005-01
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
Notes on automatic transmission | |||
1 | Clean area around drain screw (1) and the two covers (3) | ||
2 | Unscrew drain screw (1) | Drain the transmission oil completely. | |
3 | Unscrew bolts (2) and remove cover (3) with oil filter (6) | Caution when removing the oil filter (6), there is still a larger residual quantity of transmission oil present. | |
4 | Replace seal rings (4, 5) on both covers (3) and moisten with transmission oil | ||
5 | Insert both covers (3) with new oil filters (6) and screw on with bolts (2) | Screw, cap to transmission housing | |
6 | Screw in drain screw (1) | Replace seal. | |
Transmission housing drain screw | |||
Pour in | |||
7 | Check oil quality setting in Telligent maintenance system and, if necessary, adjust oil quality of transmission oil to be poured in | With CODE JW5 (Telligent maintenance system) | |
8 | Loosen transmission oil dipstick and pull out of the transmission oil filler pipe | ||
9 | Insert funnel into the opening of the transmission oil filler pipe | Funnel | |
10 | Fill with transmission oil | ||
| Service Information: Oil replenishment | ||
Automatic transmission fluid (ATF) | |||
11 | Insert transmission oil dipstick in the transmission oil filler pipe and twist | Wipe off the transmission oil dipstick using a fluff-free rag (preferably leather). | |
| Check | ||
12 | Start engine | Apply parking brake. Allow the engine to run for approx. 1 min at idle speed. | |
13.1 | Shift through all selector lever positions | Using selector lever | |
Operate service brake. Using the selector lever, remain in each position for approx. 20 s. Then shift the transmission back to position "N". | |||
13.2 | Shift transmission into position "D" and "R" | Shifting using buttons | |
Operate service brake. Remain in each transmission position for approx. 20 s. Then shift the transmission back to position "N". | |||
14.1 | Check transmission oil level and correct if necessary | With transmission oil dipstick | |
| |||
Cold transmission (20 °C to 30 °C): The transmission oil must be within the cold measuring range (B). | |||
Automatic transmission fluid (ATF) | |||
Funnel | |||
Hand pump | |||
14.2 | Check transmission oil level and correct if necessary | Shifting using buttons | |
Transmission 723.6, shifting using buttons | |||
| |||
When the engine is running, press the "Up arrow " key and "Down arrow" key simultaneously. After approx. 1 min, the transmission oil level is shown on the display of the shift mechanism. | |||
Automatic transmission fluid (ATF) | |||
Funnel | |||
Hand pump | |||
15 | Turn off engine | ||
16 | Check oil filter (6) and drain screw (1) for leaktightness |
Automatic transmission |
Number | Designation | TRANSMISSION 723.6 with CODE GB2/GB3/GB9/GC8/GE6/GG3/GG6/GG7/GG8 | TRANSMISSION 723.6 with CODE GB1/GB8/GC9/GE4/ GE5/GG4/GG5/GG9 | ||
BF27.00-N-1001-01D | Automatic transmission fluid (ATF) | Filling capacity - complete refill | l | 28 | 31 |
Filling capacity - oil change | l | 22 | 25 | ||
Additional filling capacity for 1 power take-off | l | - | - | ||
Additional filling capacity for 2 and more power take-offs | l | - | - | ||
Sheet | |||||
Sheet | |||||
126 589 12 63 00
Funnel
112 589 00 72 00
Hand pump