1 | Display |
2 | Button (up arrow) |
3 | Button (down arrow) |
N27.60-2094-02
Request transmission oil level
Check transmission oil level only when engine is running.
1 | Press buttons (2, 3) simultaneously. After a short waiting time the transmission oil level is displayed by a code. |
Transmission oil level display
Code designation
oL oK Transmission oil level OK
oL Lo Transmission oil level too low
oL Hi Transmission oil level too high
The number specified in the following gives the quantity of transmission oil which has to be refilled or drained/extracted.
Finish transmission oil level measurement
2 | Press buttons (2, 3) simultaneously, or press any gear button. |
Fault code display during transmission oil level measurement up to transmission end no. 6520038484
Code designation
oL 0X Waiting time too short
oL 50 Engine speed too low for measuring procedure
oL 59 Engine speed too high for measuring procedure
oL 65 Transmission is not shifted to neutral position "N"
oL 70 Transmission oil temperature too low
oL 79 Transmission oil temperature too high
oL 89 Vehicle is moving
oL 95 Transmission oil level sensor defective
Fault code display during transmission oil level measurement as of transmission end no. 6520038485 (4th generation)
Code designation
oL 0X Waiting time too short
oL EL Engine speed too low for measuring procedure
oL EH Engine speed too high for measuring procedure
oL SN Transmission is not shifted to neutral position "N"
oL TL Transmission oil temperature too low
oL TH Transmission oil temperature too high
oL SH Vehicle is moving
oL FL Transmission oil level sensor defective