Shown on model 292 with code M005 (4MATIC) |
1 | Tie rod joint boot |
2 | Tie rod joint |
3 | Tie rod end |
4 | Tie rod |
P46.00-2200-06
Shown on model 292 with code M005 (4MATIC) |
5 | Bellows |
6 | Clip |
P46.00-A001-06
P46.00-A002-09
Shown on model 167 |
7 | Rack-and-pinion steering | 8 | Electric power steering actuator motor |
Warning | Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. | No parts of the body or limbs should be within the operating area of mechanical components when moving components. | |
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Preparatory activity | |||
1 | Unlock steering lock. | ||
| Remove | ||
2 | Remove center underfloor paneling. | ||
| Model 166, 292 | ||
| Model 167 | ||
| Check | ||
3 | Check tie rod joint boots (1) on tie rod ends (3) for condition, leak tightness and correct seating. | If necessary, use commercially available devices/tools. | |
If problems occur, | |||
| |||
rectify the problems. | |||
After obtaining special order. | |||
4 | Check tie rod joints (2) for play by firmly pulling and pushing the tie rod ends (3). | If problems occur, | |
| |||
rectify the problems. | |||
After obtaining special order. | |||
5 | Check tie rod ends (3) and tie rods (4) for firm connection by pulling and pushing each one. | If problems occur, | |
| |||
rectify the problems. | |||
After obtaining special order. | |||
6 | Check each inner tie rod joint for play by firmly pulling and pushing on tie rods (4) in direction of rack-and-pinion steering (7). | If problems occur, | |
| |||
rectify the problems. | |||
After obtaining special order. | |||
7 | Stretch boots (5) by turning steering all the way to right and left, and check for cracks, indentations and chafe marks. | | |
If necessary, use commercially available devices/tools. | |||
If problems occur, | |||
| |||
rectify the problems. | |||
After obtaining special order. | |||
8 | Check clamps (6) are firmly and correctly seated. | | |
If necessary, use commercially available devices/tools. | |||
If problems occur, | |||
| |||
rectify the problems. | |||
After obtaining special order. | |||
9 | Check rack-and-pinion steering (7). | If necessary, use commercially available devices/tools. | |
If problems occur, | |||
| |||
Replace steering for safety reasons. | |||
After obtaining special order. | |||
10 | Check electric power steering actuator motor (8). | If necessary, use commercially available devices/tools. | |
If problems occur, | |||
| |||
Replace steering for safety reasons. | |||
After obtaining special order. | |||
| Install | ||
11 | Install center underfloor paneling. | ||
| Model 166, 292 | ||
| Model 167 |