ap2000g2010mt

Engine cooling system - check fluid level, adjust to correct level. Inspect anticorrosion/antifreeze protection, adjust to correct concentration

Vrsta ap · tema 20.00 · različica 0106 · 2019-08-23

Velja za: Model 000.001 with engine 444.9, 447.9, 457.9, 458.9, 541.9, 542.9, 900.9, 902.9, 904.9, 906.9, 907.9, 909.9, 924.9, 925.9, 926.9, 941.9, 942.9

Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.

Umestitev

Funkcijska skupina 1 Motor › 20 Hlajenje motorja › 20.00 Splošno — Serija 000 (modeli 001) · Serija 444 (modeli 9**) · Serija 447 (modeli 9**) · Serija 900 (modeli 9**) · Serija 902 (modeli 9**) · Serija 904 (modeli 9**) · Serija 906 (modeli 9**) · Serija 907 (modeli 9**) · Serija 909 (modeli 9**) · Serija 942 (modeli 9**)

EinPAS 15 motor › 15.25 hladilni sistem motorja › 15.25.5 krogotok hladilnega sredstva, celoten — Serija 000 (modeli 001) · Serija 444 (modeli 9**) · Serija 447 (modeli 9**) · Serija 900 (modeli 9**) · Serija 902 (modeli 9**) · Serija 904 (modeli 9**) · Serija 906 (modeli 9**) · Serija 907 (modeli 9**) · Serija 909 (modeli 9**) · Serija 942 (modeli 9**)

Velja tudi za motorje/menjalnike: 457 9**, 458 9**, 541 9**, 542 9**, 924 9**, 925 9**, 926 9**, 941 9**

AP20.00-G-2010MT

Engine cooling system - check fluid level, adjust to correct level. Inspect anticorrosion/antifreeze protection, adjust to correct concentration

21.08.2019

Model

000.001 with engine 444.9, 447.9, 457.9, 458.9, 541.9, 542.9, 900.9, 902.9, 904.9, 906.9, 907.9, 909.9, 924.9, 925.9, 926.9, 941.9, 942.9

Warning

Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.

Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers.
Wear protective gloves, protective clothing and safety glasses.

AS20.00-Z-0001-01A

Check

1

Unscrew cap of expansion reservoir.

2

Check coolant level.

Check and correct the coolant level only when the coolant temperature is between 0 °C and 20 °C.
The cooling system is correctly filled when the coolant is visible in the filler neck. Check the corrosion and antifreeze protection before correcting the coolant level.

3

Check anticorrosion and antifreeze protection.

To do so, remove coolant from the coolant circuit at a suitable position.

If the wrong concentration of anticorrosion and antifreeze protection has been added,

correct the concentration of anticorrosion and antifreeze protection.


AP20.00-G-2010-01MT

Coolant specifications

BB00.40-P-0310-01A

After obtaining special order.

4

Correct coolant level; to do so, add coolant up to "MAX" marking of coolant expansion reservoir.

5

Screw cap onto expansion reservoir.

Povezani dokumenti