ap2000g2010mt

Engine cooling system - check fluid level, adjust to correct level. Inspect anticorrosion/antifreeze protection, adjust to correct concentration

Type ap · topic 20.00 · version 0106 · 2019-08-23

Applies to: Model 000.001 with engine 444.9, 447.9, 457.9, 458.9, 541.9, 542.9, 900.9, 902.9, 904.9, 906.9, 907.9, 909.9, 924.9, 925.9, 926.9, 941.9, 942.9

Where it sits

Function group 1 Engine › 20 Engine cooling system › 20.00 General — Series 000 (models 001) · Series 444 (models 9**) · Series 447 (models 9**) · Series 900 (models 9**) · Series 902 (models 9**) · Series 904 (models 9**) · Series 906 (models 9**) · Series 907 (models 9**) · Series 909 (models 9**) · Series 942 (models 9**)

EinPAS 15 Engine › 15.25 Engine cooling system › 15.25.5 Coolant circuit, complete — Series 000 (models 001) · Series 444 (models 9**) · Series 447 (models 9**) · Series 900 (models 9**) · Series 902 (models 9**) · Series 904 (models 9**) · Series 906 (models 9**) · Series 907 (models 9**) · Series 909 (models 9**) · Series 942 (models 9**)

Also applies to engines/gearboxes: 457 9**, 458 9**, 541 9**, 542 9**, 924 9**, 925 9**, 926 9**, 941 9**

AP20.00-G-2010MT

Engine cooling system - check fluid level, adjust to correct level. Inspect anticorrosion/antifreeze protection, adjust to correct concentration

21.08.2019

Model

000.001 with engine 444.9, 447.9, 457.9, 458.9, 541.9, 542.9, 900.9, 902.9, 904.9, 906.9, 907.9, 909.9, 924.9, 925.9, 926.9, 941.9, 942.9

Warning

Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.

Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers.
Wear protective gloves, protective clothing and safety glasses.

AS20.00-Z-0001-01A

Check

1

Unscrew cap of expansion reservoir.

2

Check coolant level.

Check and correct the coolant level only when the coolant temperature is between 0 °C and 20 °C.
The cooling system is correctly filled when the coolant is visible in the filler neck. Check the corrosion and antifreeze protection before correcting the coolant level.

3

Check anticorrosion and antifreeze protection.

To do so, remove coolant from the coolant circuit at a suitable position.

If the wrong concentration of anticorrosion and antifreeze protection has been added,

correct the concentration of anticorrosion and antifreeze protection.


AP20.00-G-2010-01MT

Coolant specifications

BB00.40-P-0310-01A

After obtaining special order.

4

Correct coolant level; to do so, add coolant up to "MAX" marking of coolant expansion reservoir.

5

Screw cap onto expansion reservoir.

Referenced documents