Check engine cooling system for leaktightness · ar2000p1011mro · Mercedes-Benz WIS

AR20.00-P-1011MRO

Check engine cooling system for leaktightness

18.05.2020

Engine

264 in model 463

1	Cap
2	Coolant expansion reservoir
3	Tester cap
4	Pressure pump

P20.00-A074-06

 Warning	Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.	Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. Wear protective gloves, protective clothing and safety glasses.	AS20.00-Z-0001-01A
Topical note	Notes on coolant		AH20.00-N-2080-01A
	Notes on coolant level		AH20.00-P-1142-01CW
	Remove
1	Release cap (1) of the coolant expansion reservoir (2) so that overpressure can be completely relieved.
2	Remove cap (1).
3	Check coolant level and antifreeze content of the coolant; correct if necessary.
			AP20.30-P-2050GG
		 Cooling system	*BF20.00-P-1001-06D
4	Attach tester cap (3) to the coolant expansion reservoir (2) and connect pressure pump (4) to the tester cap (3).	 Test cap	*210589009100
		 Pressure pump	*124589242100
	Check
5	Apply a test pressure to the engine cooling system for 2 minutes.	 Do not exceed the specified test pressure. Otherwise the engine cooling system will be damaged.
		 There must not be any pressure loss within 2 min.
		Test pressure for pressure-testing the engine cooling system	*BE20.30-P-1005-01A
6	Check condition of all coolant carrying component parts and connections and check for leak tightness.	In the event of pressure loss.
		If problems exist,
		
		Replace corresponding components.
	Install
7	Release the test pressure via the valve on the pressure pump (4), disconnect the pressure pump (4) from the tester cap (3) and remove the tester cap (3).	 Test cap	*210589009100
		 Pressure pump	*124589242100
8	Check coolant level and antifreeze content of the coolant; correct if necessary.
			AP20.30-P-2050GG
		 Cooling system	*BF20.00-P-1001-06D

Radiator or expansion reservoir cap

Number	Designation			2-stage latch cover
BE20.30-P-1005-01A	Test pressure for pressure-testing the engine cooling system	Overpressure	bar	1,4

 Cooling system

Number	Designation				Engine 264 in model 463
BF20.00-P-1001-06D	Cooling system	Workshop replacement amount	Main circuit	Liter	13,0
			Low-temperature circuit	Liter	4,6
		Antifreeze/water	Down to -37 °C	%	50/50
			-38 °C and below	%	50/45
			Specifications for Operating Fluids, sheet		BB00.40-P-0310-01A
			Specifications for Operating Fluids, sheet		BB00.40-P-0325-06A
			Specifications for Operating Fluids, sheet		BB00.40-P-0326-06A

210 589 00 91 00

Test cap

124 589 24 21 00

Pressure pump

Documente menționate

ah2000n208001a Indicaţii pentru lichid de răcire
ah2000p114201cw Indicaţii pentru nivelul lichidului de răcire
ap2030p2050gg Verificare nivel lichid răcire circuit principal
as2000z000101a Pericol de rănire la piele şi ochi prin opărire cu lichid de răcire fierbinte pulverizat afară. Pericol de otrăvire datorită înghiţirii lichid de răcire.