P15.12-2229-09
2 | Vent line | T1/2 | Cylinder 2 ignition coil | |
3 | Bracket | T1/3 | Cylinder 3 ignition coil | |
4 | Bolts | T1/4 | Cylinder 4 ignition coil | |
T1/1 | Cylinder 1 ignition coil |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Topical note | Notes on avoiding damage to ignition system | ||
| Remove/install | ||
1 | Switch off the ignition and keep the transmitter key outside the transmitter range (at minimum 2m). | ||
2 | Remove upper engine cover. | ||
3 | Unclip bleed line (2) from the bracket (3). | ||
4 | Release and disconnect electrical connectors of the ignition coils (T1/1, T1/2, T1/3, T1/4). | ||
5 | Remove screws/bolts (4). | Screw/bolt, ignition coil to cylinder head cover | |
6 | Remove ignition coils (T1/1, T1/2, T1/3, T1/4). | Installation: | |
Installation: Approx. Fill 1 g of spark plug connector grease into the spark plug connector. | |||
Spark plug connector grease | |||
7 | Check ignition coils (T1/1, T1/2, T1/3, T1/4) for external damage and replace if necessary. | ||
8 | Install in the reverse order. | ||
9 | Read out and delete fault memory. | ||
| Engine 264 in model 238 | ||
| Engine 264 in model 213 | ||
| Engine 264 in model 257 | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
10 | Perform an engine test run and check the engine for proper function. |
Documente menționate
- ad0000p200004b
- ad0000p200006fr
- ad0000p200006lwo
- ah1510p000201v Indicaţii pentru evitarea producerii de avarii la instalaţia de aprindere
- ah5400p000101a Indicaţii pentru evitarea defectării componentelor electronice prin descărcare electrostatică
- ar0110p2405mrh
- as0000z000201a Pericol de rănire la piele şi ochi prin manipulare cu obiecte fierbinţi sau incandescente
- as0000z000501a Pericol de accident prin pornirea de pe loc cu motorul aflat în funcţionare. Pericol de rănire prin striviri şi arsuri la manipularea în timpul pornirii motorului sau cu motorul aflat în funcţionare
- as0000z003501a Pericol de moarte în cadrul lucrărilor la componentele şi sistemele cu U >= 30 V tensiune alternativă (CA) respectiv cu U >= 60 V tensiune continuă (CC)