S07.03-4559-79
1 | Rail | 3 | Bolts | 5 | Charge air pipe | ||
2 | High pressure pipe | 4 | Electrical connector | 6 | Screw |
Danger | Risk of explosion caused by fuel igniting. Risk of injury to skin and eyes caused by fuel spraying out at high pressure | Keep all ignition sources out of hazard area. | |
Danger | Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel. | No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only. | |
Topical note | Notes on threaded connections fastened using a tightening angle-based tightening process | ||
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
Note on calculation of tightening torque when using insertion or socket tools with various effective lengths | |||
Notes about Common-Rail components | |||
| Remove/install | ||
1 | Remove upper section of right air filter housing. | ||
| Replace air filter element | ||
Installation: Only install upper engine cover after the leak test. | |||
2 | Remove clean air line. | ||
3 | Remove screw/bolts (3). | Bolt, high-pressure line retaining clamp to cylinder head cover/charge-air distributor | |
4 | Remove union nut of high-pressure line (2) at rail (1). | Union nut, rail high-pressure line to rail | |
Open double hexagon box wrench | |||
5 | Remove injection lines at rail (1). | ||
Installation: Also position high-pressure line (2) during attachment of injection lines so that free of tension and slightly tighten its union nut by hand. | |||
6 | Disconnect electrical connection (4). | ||
7 | Remove rail (1). | | |
To do so, remove the screw/bolts (6). Plug openings. | |||
Installation: Do not yet screw in screws (6). | |||
Record plug | |||
| Check | ||
8 | Check sealing cone of high-pressure line (2) for pressure marks. | If pressure marks exist | |
| |||
Remove charge air pipe (5) and replace high-pressure line (2). | |||
Union nut, rail high-pressure line to rail | |||
Open double hexagon box wrench | |||
9 | Install in the reverse order. | ||
| Check | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
10 | Check fuel system for leaks with engine running. | Visual inspection only. |
129 589 00 91 00
Record plug
454 589 00 03 00
Open double hexagon box wrench
Documente menționate
- ah0000p001501cw Indicaţie pentru calcularea cuplului de strângere la utilizarea de scule introduse cu diverse lungimi utile
- ah0000p002001a Indicaţii referitoare la îmbinările filetate, care au fost realizate conform procedeului de strângere în funcţie de unghiul de rotire
- ah0000p500001a Indicaţii pentru evitarea defecţiunilor din cauza impurităţilor şi corpurilor străine
- ah0716p000201tx Indicaţii componente Common-Rail
- ah5400p000101a Indicaţii pentru evitarea defectării componentelor electronice prin descărcare electrostatică
- ap0910s0980ps Înlocuire cartuş filtru aer
- ar0716s1080ps
- ar0910s8140ps
- ar0941s1333ps
- as0000z000501a Pericol de accident prin pornirea de pe loc cu motorul aflat în funcţionare. Pericol de rănire prin striviri şi arsuri la manipularea în timpul pornirii motorului sau cu motorul aflat în funcţionare
- as0716z000101a Pericol de explozie prin aprinderea carburantului. Pericol de rănire a pielii şiochilor datorită jetului de combustibil care se scurge
- as4700z000101a Pericol de explozie prin aprindere, pericol de intoxicare prin inhalare şi înghiţire de carburant cât şi pericol de rănire prin contactul pielii şi ochilor cu carburantul