ar8820d2100ts

Disassemble/assemble rear bumper

Typ ar · temat 88.20 · wersja 0100 · 2019-01-04

Dotyczy: Model 907.6/7, 910.6 with code JA7 (Blind Spot Monitoring) Model 907.6/7, 910.6 with code JB6 (Parking package with 360-degree camera) Model 907.6/7, 910.6 with code JB7 (Parking Package with reversing camera)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 88 Części dobudowane, klapy zewnętrzne › 88.20 Zderzak — Seria 907 (modele 6**, 7**) · Seria 910 (modele 6**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.38 Zderzak/spojler/okładzina zewnętrzna/schowek/przednie zabezpieczenie › 35.38.31 Zderzak tylny — Seria 907 (modele 6**, 7**) · Seria 910 (modele 6**)

AR88.20-D-2100TS

Disassemble/assemble rear bumper

20.12.2018

Model

907.6/7, 910.6

with code JA7 (Blind Spot Monitoring)

Model

907.6/7, 910.6

with code JB6 (Parking package with 360-degree camera)

Model

907.6/7, 910.6

with code JB7 (Parking Package with reversing camera)

Disassemble/assemble rear bumper

D88.20-1124-07

Shown with code JA7 (Blind Spot Assist) and with code JB6 (Parking Package with 360° camera)

1

Rear bumper

3

Electrical wiring harness

2

Parktronic sensors

Disassemble/assemble rear bumper

D88.20-1125-07

Shown with code W73 (Rear-end door step) and with code JB6 (Parking Package with 360° camera)

1

Rear bumper

3

Electrical wiring harness

2

Parktronic sensors

8

Rear bumper bracket

Disassemble/assemble rear bumper

D88.20-1126-08

Shown with code W73 (Rear-end door step) and with code Q22 (Trailer coupling, non-removable ball head)

1

Rear bumper

8

Rear bumper bracket

2

Parktronic sensors

9

Cover

3

Electrical wiring harness

10

Catches

Disassemble/assemble rear bumper

D88.20-1127-08

Shown with code JB6 (Parking Package with 360° camera)

8

Rear bumper bracket

12

Catches

11

Catches

Disassemble/assemble rear bumper

Shown with code JA7 (Blind Spot Assist) and with code JB6 (Parking Package with 360° camera), left side of vehicle

2

PARKTRONIC sensor

4

Bumper corner upper section

5

Radar sensor

6

Bumper corner

7

Reflector

D88.20-1128-12

Disassemble/assemble

1

Remove rear bumper (1).

AR88.20-D-2200TS


Set down rear bumper (1) on a suitable base.
This prevents damage to rear bumper (1).

2

Remove electrical wiring harness (3).

Assembly:
Ensure that electrical wiring harness (3) is routed correctly.
Damage may occur otherwise.

3

Remove PARKTRONIC (2) sensors.


Model 907.6/7, 910.6
with code JB6 (Parking package with 360-degree camera)
except code QA9 (Cross member with integral step)
except code W73 (Rear door step)
except code W75 (Step, wide, at rear end)
except code W76 (Rear step sprung)
Model 907.6/7, 910.6
with code JB7 (Parking Package with reversing camera)
except code QA9 (Cross member with integral step)
except code W73 (Rear door step)
except code W75 (Step, wide, at rear end)
except code W76 (Rear step sprung)

AR54.65-D-0027TS

Model 907.6/7, 910.6
with code JB6 (Parking package with 360-degree camera)
with code W73 (Rear door step)
Model 907.6/7, 910.6
with code JB7 (Parking Package with reversing camera)
with code W73 (Rear door step)

AR54.65-D-0019TS

4

Remove cover (9).

Models 907.6/7, 910.6 with code Q22 (Trailer coupling with non-removable ball head)

For this purpose, release catches (10).

5

Remove radar sensors (5).


Model 907.6/7, 910.6
with code JA7 (Blind Spot Monitoring)

AR54.71-D-0003TS

6

Remove reflectors (7).

For this purpose, release catches (arrows A).

7

Remove rear bumper corners (6).

AR88.20-D-0010TS

8

Remove bumper corner upper sections (4).

9

Remove rear bumper (1) from rear bumper holder (8).

For this purpose, release catches (11, 12).

10

Assemble in the reverse order.

Powiązane dokumenty