Remove/install rear bumper

AR88.20-D-2200TS

Remove/install rear bumper

13.02.2018

Model

907.6/7, 910.6

with code JA7 (Blind Spot Monitoring)

Model

907.6/7, 910.6

with code JB6 (Parking package with 360-degree camera)

Model

907.6/7, 910.6

with code JB7 (Parking Package with reversing camera)

Shown on model 907.6 with code JB7 (Parking Package with reversing camera)

1

Bumper

3

Protective strips

5

Expansion rivet

2

Bumper corner upper sections

4

Expansion rivet

Shown on model 907.6 with code JB7 (Parking Package with reversing camera)

1

Bumper

6

Bolts

7

Expansion rivet

8

Electrical connector

Shown with code W73 (Rear-end door step)

1

Bumper

9

Expansion rivet

Shown with code W73 (Rear-end door step) and with code Q22 (Trailer coupling, non-removable ball head)

1

Bumper

10

Expansion rivet

11

Bolts

 Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

 

Remove/install

1

Switch off ignition and store transmitter key outside of transmission range (min. 2 m)

2

Raise vehicle

AR00.60-D-1000-04TS

Topical note

Special instructions for lifting and supporting vehicle

AH00.60-N-0100-01TS

3

Remove rear protective strips (3)

AR88.80-D-1040TS

4

Remove expansion rivet (4)

 Installation: Replace expansion rivets (4).

5

Remove expansion rivets (5)

 Installation: Check expansion rivets (5) for damage.

Depending on findings



Replace damaged expansion rivets (5).

6

Remove bumper corner upper sections (2)

 For this purpose, unclip bumper corner upper sections (2) at side wall.

 Installation: Check retaining clips for damage.

 Long wedge

*115589035900

Depending on findings



Replace damaged retaining clips.

7.1

Remove expansion rivets (7)

Model 907.6/7, 910.6 except code W73 (Rear-end door step)

 Installation: Check expansion rivets (7) for damage.

Depending on findings



Replace damaged expansion rivets (7).

7.2

Remove expansion rivets (9)

Model 907.6/7, 910.6 with code W73 (Rear-end door step) except code Q22 (Trailer coupling, non-removable ball head)

 Installation: Check expansion rivets (9) for damage.

Depending on findings



Replace damaged expansion rivets (9).

7.3

Remove expansion rivets (9,10)

Model 907.6/7, 910.6 with code Q22 (Trailer coupling, non-removable ball head) with code W73 (Rear-end door step)

 Installation: Check expansion rivets (9, 10) for damage.

Depending on findings



Replace damaged expansion rivets (9, 10).

8

Remove screws/bolts (11)

Model 907.6/7, 910.6 with code Q22 (Trailer coupling, non-removable ball head) with code W73 (Rear-end door step)

 For this purpose, counterhold nuts.

9

Disconnect electrical connector (8)

10

Remove bumper (1)

 Remove screws (6) for this.

 Helper required.

 Screw, rear bumper to body

*BA88.20-N-1001-01TS

11

Install in the reverse order



Check

12

Function check of Blind Spot Assist

Model 907.6/7, 910.6 with code JA7 (Blind Spot Assist)

13

Function check of PARKTRONIC

Model 907.6/7, 910.6
with code JB6 (Parking package with 360-degree camera)
Model 907.6/7, 910.6
with code JB7 (Parking Package with reversing camera)

 Bumper

Number

Designation

Model 907, 910

BA88.20-N-1001-01TS

Screw, rear bumper to body

Nm

9