ar8820d0010ts

Remove/install rear bumper corners

Typ ar · temat 88.20 · wersja 0100 · 2018-02-28

Dotyczy: Model 907.6/7, 910.6

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 88 Części dobudowane, klapy zewnętrzne › 88.20 Zderzak — Seria 907 (modele 6**, 7**) · Seria 910 (modele 6**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.38 Zderzak/spojler/okładzina zewnętrzna/schowek/przednie zabezpieczenie › 35.38.31 Zderzak tylny — Seria 907 (modele 6**, 7**) · Seria 910 (modele 6**)

AR88.20-D-0010TS

Remove/install rear bumper corners

13.02.2018

Model

907.6/7, 910.6

Remove/install rear bumper corners

Shown on removed rear bumper (6), left side, with code JA7 (Blind Spot Assist) and code JB6 (Parking Package with 360° camera)

1

Rear bumper corner

2

Electrical connector (with code JA7 (Blind Spot Assist))

3

Electrical connector (with code JB6 (Parking Package with 360° camera) or with code JB7 (Parking Package with reversing camera))

4

Electrical wiring harness (with code JA7 (Blind Spot Assist) or with code JB6 (Parking Package with 360° camera) or with code JB7 (Parking Package with reversing camera))

5

Catches

6

Rear bumper

D88.20-1123-10

Remove/install

1

Remove rear bumper (6)


Model 907.6/7, 910.6
with code JA7 (Blind Spot Monitoring)
Model 907.6/7, 910.6
with code JB6 (Parking package with 360-degree camera)
Model 907.6/7, 910.6
with code JB7 (Parking Package with reversing camera)

AR88.20-D-2200TS

Model 907.6/7, 910.6
except code JA7 (Blind Spot Monitoring)
except code JB6 (Parking package with 360-degree camera)
except code JB7 (Parking Package with reversing camera)

AR88.20-D-2200TSB

2

Set down rear bumper (6) on suitable base

3

Disconnect electrical connection (2)

Model 907.6/7, 910.6
with code JA7 (Blind Spot Monitoring)

4

Disconnect electrical connector (3)

Model 907.6/7, 910.6
with code JB6 (Parking package with 360-degree camera)
Model 907.6/7, 910.6
with code JB7 (Parking Package with reversing camera)

5

Remove electrical wiring harness (4) from respective rear bumper corner (1)

Model 907.6/7, 910.6
with code JA7 (Blind Spot Monitoring)
Model 907.6/7, 910.6
with code JB6 (Parking package with 360-degree camera)
Model 907.6/7, 910.6
with code JB7 (Parking Package with reversing camera)

Installation:
Ensure that electrical wiring harness (4) is routed correctly.
This prevents damage to electrical wiring harness (4).

6

Release respective rear bumper corner (1)

For this purpose, release rear bumper corner (1) from catches (5) (arrows).

Installation: Ensure correct engagement of rear bumper corner (1).

7

Remove respective rear bumper corner (1)

For this purpose, pull rear bumper corner (1) out of rear bumper (6).

8

Install in the reverse order

Powiązane dokumenty