Remove/install dashboard

AR68.10-D-1000TS

Remove/install dashboard

15.03.2018

Model

907, 910

Shown on model 907 with code SA6 (front passenger airbag)

1

Instrument panel

4

Screw

2

Lower paneling on passenger side

5

Electrical connectors

3

Bolts

6

Electrical connector

1

Instrument panel

9

Bolts

7

Screw

14

Screw

8

Air duct

15

Air duct

1

Instrument panel

11

Electrical connector

10

Bolts

Shown on model 907 with code HY1 (radio remote control for hot-water auxiliary heater)

1

Instrument panel

12

Antenna for stationary heater Telestart receiver

13

Line bracket

 Warning

Risk of injury during testing and repair operations related to pyrotechnical components

Do not expose pyrotechnical component parts to temperatures above 100 °C or 212 °F. Disconnect current supply when working on such component parts.

AS91.00-Z-0008-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Information, assessment and legal requirements when working with, handling and storing pyrotechnical components

AH91.00-Z-0000-10A

 

Remove/install

1

Remove front side air vents.

AR83.10-D-4741TS

2

Remove defroster vents for the side windows.

AR83.10-D-4719TS

3

Remove steering column module.

AR54.25-D-2802TS

4

Remove steering column cover from the instrument panel.

AR68.10-D-1060TS

5

Remove instrument cluster.

AR54.30-D-6016TS

6

Remove bottom trim for the instrument panel on the driver's side.

AR68.10-D-1501TS

7.1

Remove head unit.

Model 907, 910
with code E1A (MBCONNECT-5)
Model 907, 910
with code E1C (Audio 25)
Model 907, 910
with code EJ2 (Audio 20)
Model 907, 910
with code EJ9 (COMAND Online)

AR82.85-D-1101TS

7.2

Remove radio.

Model 907, 910
with code E1O (Entry-level radio)

AR82.60-D-7502TS

7.3

Remove top center trim from the instrument panel.

Model 907, 910
with code ER0 (Basic fittings f. radio)
Model 907, 910
with code FJ6 (Center area with 2-DIN stowage compartments and air vent)

AR68.10-D-1497TS

7.4

Remove top center stowage compartment from the instrument panel.

Model 907, 910
with code FJ7 (Center area with stowage compartment)

AR68.10-D-1514TS

8.1

Remove stowage tray from the instrument panel.

Model 907, 910
except code FJ1 (Hinged lid for stowage compartment)
except code FJ5 (Folding cover for left and right stowage compartments)

AR68.10-D-0003TS

8.2

Remove lockable center stowage compartment from the instrument panel.

Model 907, 910
with code FJ1 (Hinged lid for stowage compartment)

AR68.10-D-1518TS

9

Remove covers for the side speakers from the instrument panel.

AR68.10-D-0002TS

10

Remove A-pillar trims.

AR68.30-D-4051TS

11

Remove center trim from instrument panel.

AR68.10-D-0001TS

12

Remove start/stop button.

AR54.25-D-4001TS

13

Remove vehicle interior temperature sensor.

Model 907, 910
with code HH4 (THERMOTRONIC automatic climate control)
Model 907, 910
with code HH9 (Air conditioner, automatic heater control)

AR83.30-D-8105TS

14.1

Remove bottom trim for instrument panel on the front passenger side.

Model 907, 910
except code FJ4 (Stowage compartment under cockpit)

AR68.10-D-1502TSF

14.2

Remove stowage compartment in the lower part of the instrument panel on the front passenger side.

Model 907, 910
with code FJ4 (Stowage compartment under cockpit)

AR68.10-D-1610TS

15

Remove central locking system antenna amplifier.

AR80.20-D-0002TS

16

Remove speaker from the center instrument panel.

Model 907, 910
with code E1C (Audio 25)
Model 907, 910
with code EJ2 (Audio 20)
Model 907, 910
with code EJ9 (COMAND Online)
Model 907, 910
with code EY5 (Mercedes-Benz emergency call system)

AR82.62-D-1101TS

17

Remove side speakers from instrument panel.

Model 907, 910
with code EL9 (Two-way loudspeaker system in front and rear)

AR82.62-D-1102TS

18

Remove screw/bolts (3).

 The number of screws (3) can vary depending on the vehicle equipment.

19

Remove bottom front passenger side trim (2).

20

Disconnect electrical connectors (5).

Model 907, 910
with code SA6 (Airbag, co-driver)

21

Unscrew screw (4).

Model 907, 910
with code SA6 (Airbag, co-driver)

 Front passenger airbag remains on instrument panel (1).

22

Disconnect electrical connectors (6).

If installed.

 The number of electrical connectors (6) may vary depending on the vehicle equipment involved.

23

Unscrew bolt (7).

24

Remove air duct (8).

25

Remove screw (14).

26

Remove air duct (15).

27

Separate electrical connector (11).

If installed.

28

Remove screws/bolts (9).

29

Unscrew bolts (10).

30

Slightly lift instrument panel (1) and release from crossmember.

31

Completely open the front door on the front passenger side.

32

Attach suitable protective covers in the entrance and door area on the front passenger side.

33

Lift instrument panel (1) starting from the front passenger side and unclip the antenna for the stationary heater Telestart receiver (12) on the line brackets (13) from the instrument panel (1).

Model 907, 910
with code HY1 (Radio remote control for aux. water heater)


Do not lift instrument panel (1) too far.
Otherwise, damage to the antenna for the stationary heater Telestart receiver (12) may occur.

 Helper required.

 Clip remover

*452589016300

34

Remove instrument panel (1) and set down outside of the vehicle.

 Helper required.

35

Install in the reverse order.



Check

36

Perform function test of all components installed in the instrument panel (1).