ar6330d0846ts

Remove/install center side longitudinal member

Typ ar · temat 63.30 · wersja 0100 · 2018-01-18

Dotyczy: Model 907.6/7

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 63 Ściana boczna › 63.30 Podłużnica na zewnątrz — Seria 907 (modele 6**, 7**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.41 Belka/ nadkole — Seria 907 (modele 6**, 7**)

AR63.30-D-0846TS

Remove/install center side longitudinal member

03.01.2018

Model

907.6/7

Remove/install center side longitudinal member

Shown on model 907.633 with code D03 (Roof and rear-end doors, high version), left side of vehicle

1

Center side longitudinal member

D63.30-0328-05

Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

General information on body repair

AH60.00-N-0001-01A

Remove

1

Remove all detachable parts in area to be repaired

2

Cover all detachable parts remaining in vehicle with welding protection blankets

3

Remove respective center bottom sidewall paneling

AR63.10-D-5654TS

4

Remove center side longitudinal member (1)

AR63.30-D-0846-01TS

1K-zinc dust paint

*BR00.45-Z-1056-07A

5

Prepare center side longitudinal member (1) for installation

AR63.30-D-0846-02TS

1K-zinc dust paint

*BR00.45-Z-1056-07A

Install

Danger

The high voltage used for electric welding presents a lethal hazard. Risk of explosion from welding in areas close to highly inflammable materials. Risk of injury from weld splatter and UV-light when welding. Risk of poisoning from inhaling welding gases

Use insulating mats. Wear protective clothing, safety glasses and a protective mask. Remove highly inflammable materials from the hazard area. Use air extraction system.

AS00.00-Z-0007-01A

6

Install center side longitudinal member (1)

AR63.30-D-0846-03TS

Topical note

Measures for preventing damage to vehicles or components when performing electric welding work

AH00.00-N-0005-01A

000 588 01 84 00 Welder

WS60.00-P-0021K

000 588 02 84 00 Welder

WS60.00-P-0022K

7

Install respective center bottom sidewall paneling

AR63.10-D-5654TS

8

Remove welding protection blankets

9

Install all detachable body components in area to be repaired

Repair materials

Number

Designation

Order number

BR00.45-Z-1056-07A

1K-zinc dust paint

A 000 986 28 00

Powiązane dokumenty