Prepare center side longitudinal member for installation · ar6330d084602ts · Mercedes-Benz WIS

AR63.30-D-0846-02TS	Prepare center side longitudinal member for installation
 Caution	Risk of injury caused by scraping or cutting body parts on sharp vehicle parts	Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels.	AS00.00-Z-0017-01A

Model

907.6/7

Repair materials

Number	Designation	Order number
BR00.45-Z-1056-07A	1K-zinc dust paint	A 000 986 28 00

 The next steps are shown on the left component part and must be performed in a similar way in the event of damage on the right side of the vehicle.

D63.30-0333-09

1	Punch holes in center side longitudinal member (1) with a diameter of 6 mm (areas J, L, and O).

2	Drill holes in center side longitudinal member (1) with a diameter of 7 mm (areas K, M, and N).

 Transfer hole dimensions (areas K, N, and M) from vehicle.

3	Grind cross-hatched areas on center side longitudinal member (1) down to bare metal around the holes.

4	Grind mating surfaces on center side longitudinal member (1) down to bare metal in cross-hatched areas.

 Sand down spot weld flanges to bare metal on both sides.

5	Remove shavings and drill chips.

6	Zinc dust paint to insides of spot weld flanges.

as0000z001701a Niebezpieczeństwo obrażeńo elementy pojazdu o ostrych krawędziach.