Shown on model 907.633 with code D03 (Roof and rear-end doors, high version), left side of vehicle |
1 | Center side longitudinal member |
D63.30-0328-05
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Topical note | General information on body repair | ||
| Remove | ||
1 | Remove all detachable parts in area to be repaired | ||
2 | Cover all detachable parts remaining in vehicle with welding protection blankets | ||
3 | Remove respective center bottom sidewall paneling | ||
4 | Remove center side longitudinal member (1) | ||
1K-zinc dust paint | |||
5 | Prepare center side longitudinal member (1) for installation | ||
1K-zinc dust paint | |||
| Install | ||
Danger | The high voltage used for electric welding presents a lethal hazard. Risk of explosion from welding in areas close to highly inflammable materials. Risk of injury from weld splatter and UV-light when welding. Risk of poisoning from inhaling welding gases | Use insulating mats. Wear protective clothing, safety glasses and a protective mask. Remove highly inflammable materials from the hazard area. Use air extraction system. | |
6 | Install center side longitudinal member (1) | ||
Topical note | Measures for preventing damage to vehicles or components when performing electric welding work | ||
| 000 588 01 84 00 Welder | ||
| 000 588 02 84 00 Welder | ||
7 | Install respective center bottom sidewall paneling | ||
8 | Remove welding protection blankets | ||
9 | Install all detachable body components in area to be repaired |
Referenced documents
- ah0000n000501a Measures for preventing damage to vehicles or components when performing electric welding work
- ah6000n000101a General information on body repair
- ar6310d5654ts Replace center lower side wall paneling
- ar6330d084601ts Remove center side longitudinal member
- ar6330d084602ts Prepare center side longitudinal member for installation
- ar6330d084603ts Install center side longitudinal member
- as0000z000701a The high voltage used for electric welding presents a lethal hazard. Risk of explosion from welding in areas close to highly inflammable materials. Risk of injury from weld splatter and UV-light when welding. Risk of poisoning from
- as0000z001001a Risk of death caused by vehicle slipping or toppling off of the lifting platform.
- as0000z001701a Risk of injury caused by scraping or cutting body parts on sharp vehicle parts
- ws6000p0021k 000 588 01 84 00 Welder
- ws6000p0022k 000 588 02 84 00 Welder