Shown on model 907.633 with code D03 (roof and rear-end doors, high version), with code T16 (right sliding door), right side of vehicle |
1 | Complete sliding door entrance |
D63.30-0347-05
Danger | The high voltage used for electric welding presents a lethal hazard. Risk of explosion from welding in areas close to highly inflammable materials. Risk of injury from weld splatter and UV-light when welding. Risk of poisoning from inhaling welding gases | Use insulating mats. Wear protective clothing, safety glasses and a protective mask. Remove highly inflammable materials from the hazard area. Use air extraction system. | |
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Topical note | Measures for preventing damage to vehicles or components when performing electric welding work | ||
Topical note | General information on body repair | ||
| Remove | ||
1 | Remove all detachable parts in area to be repaired | ||
2 | Cover all detachable parts remaining in vehicle with welding protection blankets | ||
3 | Separate complete sliding door entrance (1) | ||
1K-zinc dust paint | |||
4 | Prepare complete sliding door entrance (1) | ||
1K-zinc dust paint | |||
5 | Prepare outer sliding door entrance for welding in | ||
1K-zinc dust paint | |||
| Install | ||
6 | Install and weld in complete sliding door entrance (1) | ||
| 000 588 01 84 00 Welder | ||
| 000 588 02 84 00 Welder | ||
7 | Install outer sliding door entrance | ||
| 000 588 01 84 00 Welder | ||
| 000 588 02 84 00 Welder | ||
As an alternative to restoring the surfaces | |||
| |||
Use basic body filler on body. | |||
Process filler on body | |||
Silicone remover Order No. 3295 | |||
Basic body filler | |||
Parts kit for 2-component adhesive for body | |||
8 | Clean weld joints and sheet metal flanges with rotary wire brush | ||
9 | Remove welding protection blankets | ||
10 | Clean repair area | ||
Danger | Risk of explosion caused by paint vapors igniting. Risk of poisoning caused by inhaling paint vapors. | No smoking! No open fire! Use respiratory protection, protective clothing, gloves, safety glasses and protective skin cream. Ensure that the area is well ventilated. | |
11 | Prime repair area with primer filler | ||
Topical note | Notes on paintwork repairs | ||
Use only primer filler approved by Daimler AG: | |||
12 | Seal seam following repairs | ||
Supplement standard seals with sealant. | |||
Danger | Risk of explosion caused by paint vapors igniting. Risk of poisoning caused by inhaling paint vapors. | No smoking! No open fire! Use respiratory protection, protective clothing, gloves, safety glasses and protective skin cream. Ensure that the area is well ventilated. | |
13 | Paint repair area adjacent surfaces | ||
Topical note | Notes on paintwork repairs | ||
Use only paints approved by Daimler AG: | |||
14 | Add cavity preserving agent | ||
15 | Install all detachable body components in area to be repaired |
Repair materials |
Number | Designation | Order number |
BR00.45-Z-1052-04A | Silicone remover Order No. 3295 | Prosol Lacke + Farben GmbH |
BR00.45-Z-1056-07A | 1K-zinc dust paint | A 000 986 28 00 |
BR00.45-Z-1057-07A | Basic body filler | A 012 989 29 71 |
BR00.45-Z-1162-02A | Parts kit for 2-component adhesive for body | A 012 989 17 71 |
Powiązane dokumenty
- ah0000n000501a Zabezpieczenia zapobiegające uszkodzeniom pojazdu lub jego elementów podczas spawania elektrycznego
- ah6000n000101a Ogólne wskazówki dotyczące napraw nadwozia
- ah9800p940802a Wskazówki dotyczące napraw powłok lakierniczych
- ar6000s003101p
- ar6330d000402ts
- ar6330d000403ts
- ar6330d000801ts
- ar6330d000802ts
- ar6330d000803ts
- ar9710d4000ts
- ar9720d1500ts
- as0000z000701a Zagrożenie dla życia przez wysokie napięcie przy spawaniu elektrycznym. Niebezpieczeństwo wybuchu podczas spawania w pobliżu materiałów łatwopalnych. Niebezpieczeństwo urazu na skutek odprysków przy spawaniu oraz promieniowania u
- as0000z001001a Zagrożenie życia na skutek ześlizgnięcia lub spadnięcia pojazdu z podnośnika.
- as0000z001701a Niebezpieczeństwo obrażeńo elementy pojazdu o ostrych krawędziach.
- as9800z000201a Niebezpieczeństwo eksplozji w wyniku zapalenia się oparów lakierniczych. Niebezpieczeństwo zatrucia na skutek wdychania oparów lakierniczych.
- ws6000p0021k
- ws6000p0022k