Prepare outer sliding door entrance for welding in · ar6330d000402ts · Mercedes-Benz WIS

AR63.30-D-0004-02TS	Prepare outer sliding door entrance for welding in
 Caution	Risk of injury caused by scraping or cutting body parts on sharp vehicle parts	Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels.	AS00.00-Z-0017-01A

Model	907.6/7, 910.6
	with code T16 (Sliding door right)
	Right side of vehicle
Model	907.6/7, 910.6
	with code T19 (Sliding door left)
	Left side of vehicle

Repair materials

Number	Designation	Order number
BR00.45-Z-1056-07A	1K-zinc dust paint	A 000 986 28 00

 The next steps are shown on the right component part and must be carried out in the same way for vehicles with code T19 (left sliding door) on the left side of the vehicle in the event of damage.

Prepare outer sliding door entrance for welding in

D63.30-0341-09

1	Scribe separating line on outer sliding door entry (1) (area A).

 Take over separation line from vehicle.

2	Cut outer sliding door entry (1) at separating line (area A).

 Dispose of cut-off remaining piece.

3	Remove outer sliding door entrance (1).

4	Punch holes in outer sliding door entrance (1) (area B).

5	Grind mating surfaces down to bare metal in cross-hatched areas and around holes (area B).

 Sand down spot weld flanges to bare metal on both sides.

6	Remove shavings.

7	Zinc dust paint to insides of spot weld flanges.

Powiązane dokumenty

as0000z001701a Niebezpieczeństwo obrażeńo elementy pojazdu o ostrych krawędziach.