S60.00-4880-06
S60.00-4596-09
Illustration of left side of vehicle |
1 | Electrical wiring harness | 4 | Bolts | |
2 | Bolts | 5 | Bracket | |
3 | Bracket |
6 | Screw |
7 | Sleeve |
8 | Threaded bushing |
S60.00-4597-06
9 | Trim Panels |
S98.00-4536-06
Topical note | General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment | Typ 447.8 mit Motor 780.702 | |
Topical note | Notes on carrying out repair work in the vehicle interior | ||
| Remove/install | ||
1 | Detach ground line of on-board electrical system battery. | ||
2 | Disconnect ground line of auxiliary battery. |
| |
3 | Remove ground line of the auxiliary battery for ECO start/stop function. |
| |
Model 447.7 with code D50 (Full-width partition wall) with code MJ8 (ECO start/stop function), model 447.7 with code D51 (Full-width partition wall with 1 window) with code MJ8 (ECO start/stop function), model 447.7 with code MJ8 (ECO start/stop function) with code S23 (Two-seater front passenger seat) | |||
4 | Disconnect ground on additional battery for park pawl emergency shift. |
| |
5 | Remove trims (9). | ||
6 | Remove panoramic roof. | ||
7 | Remove windshield. | ||
8 | Remove window airbag. |
| |
Model 447.7/8 with code SH9 (Window airbag for driver and front passenger) except code SH8 (Window airbag for driver, front passenger and rear) except code ZH6 (Marco Polo ACTIVITY) except code ZK7 (MARCO POLO equipment line), model 448.8 with code SH9 (Window airbag for driver and front passenger) except code SH8 (Window airbags for driver, front passenger and rear) | |||
9.1 | Remove front roof strip. | Model 447.7/8 except code D12 (Roof railing) except code D14 (Anodized roof railing), model 448.8 except code D14 (Anodized roof railing) | |
9.2 | Remove roof railing | Model 447.7 with code D12 (Roof railing), model 447.8, 448.8 with code D14 (Anodized roof railing) | |
10 | Remove air ducts from rear air conditioning system. |
| |
11 | Remove brackets (3). | To do this, remove screws (2). | |
12 | Remove the holders (5). | For this purpose, remove bolts (4). | |
13 | Remove screws (6). | Unscrew screws (6) with sleeves (7) downwards. | |
14 | Remove threaded bushings (8) upward. | ||
15 | Remove electrical wiring harness (1). | Remove electrical wiring harness (1) on both sides of vehicle. | |
16 | Remove liftgate. | ||
17 | Install in the reverse order. |
Powiązane dokumenty
- ah0000z030001a Ogólne wskazówki dotyczące pojazdów z instalacją wysokiego napięcia i/lub akumulatorem litowo-jonowym i/lub gazowym systemem napędu oraz osobistego wyposażenia ochronnego
- ah6800n000101s Wskazówki dotyczące wykonywania prac naprawczych we wnętrzu pojazdu
- ar5410s0003e
- ar5410s0003e
- ar5410s0004e
- ar5410s0111e
- ar5410s0111ee
- ar5410s0120e
- ar6710s1000e
- ar7220s1020e
- ar7721s0750e
- ar7740s5000e
- ar8350s4000e
- ar8880s9580e
- ar9160s0693e
- ar9160s0693ee