ar9160s0693ee

Removing, installing windowbag

Typ ar · temat 91.60 · wersja 0103 · 2018-05-07

Dotyczy: Model 447 with code SH9 (Windowbag for driver and co-driver) except code SH8 (Windowbags for driver, front passenger and rear) except code ZH6 (Marco Polo ACTIVITY) except code ZK7 (Equipment line MARCO POLO) Model 448 with code SH9 (Windowbag for driver and co-driver) except code SH8 (Windowbags for driver, front passenger and rear)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 91 Fotele, leżanki, system zabezpieczenia pasażerów › 91.60 Poduszki powietrzne, system ochrony pieszych — Seria 447 · Seria 448

EinPAS 27 Bezpieczeństwo bierne/ systemy zabezpieczające przed skutkami wypadków › 27.16 Poduszka powietrzna › 27.16.20 Poduszka powietrzna — Seria 447 · Seria 448

AR91.60-S-0693EE

Removing, installing windowbag

25.04.2018

Model

447

with code SH9 (Windowbag for driver and co-driver)

except code SH8 (Windowbags for driver, front passenger and rear)

except code ZH6 (Marco Polo ACTIVITY)

except code ZK7 (Equipment line MARCO POLO)

Model

448

with code SH9 (Windowbag for driver and co-driver)

except code SH8 (Windowbags for driver, front passenger and rear)

Removing, installing windowbag

S91.60-4607-09

Shown on left side of vehicle

1

Window airbag

4

Electrical connector

2

Clips

R12/14

Left front windowbag squib

3

Bolts

R12/15

Right front windowbag squib

Warning

Risk of injury during testing and repair operations related to pyrotechnical components

Do not expose pyrotechnical component parts to temperatures above 100 °C or 212 °F. Disconnect current supply when working on such component parts.

AS91.00-Z-0008-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Information, assessment and legal requirements when working with, handling and storing pyrotechnical components

AH91.00-Z-0000-10A

Remove/install

1

Disconnect battery ground line

AR54.10-S-0003E

2

Remove front headliner

AR68.30-S-7607E

3

Release clamps (2)

4

Disconnect electrical connector (4) from left front windowbag squib (R12/14) or right front windowbag squib (R12/15)

5

Remove screws/bolts (3) and windowbag (1)

Bolt, left and right windowbag retention system mount

*BA91.60-N-1007-01G

6

Install in the reverse order

Check

7

Connect diagnostic system and check supplemental restraint system (SRS)

If windowbag (1) was replaced.

AD00.00-S-2000-04E

Airbag

Number

Designation

Model 447, 448

BA91.60-N-1007-01G

Bolt, left and right windowbag retention system mount

Nm

8

Powiązane dokumenty