S60.00-4880-06
S60.00-4596-09
Illustration of left side of vehicle |
1 | Electrical wiring harness | 4 | Bolts | |
2 | Bolts | 5 | Bracket | |
3 | Bracket |
6 | Screw |
7 | Sleeve |
8 | Threaded bushing |
S60.00-4597-06
9 | Trim Panels |
S98.00-4536-06
Topical note | General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment | Typ 447.8 mit Motor 780.702 | |
Topical note | Notes on carrying out repair work in the vehicle interior | ||
| Remove/install | ||
1 | Detach ground line of on-board electrical system battery. | ||
2 | Disconnect ground line of auxiliary battery. |
| |
3 | Remove ground line of the auxiliary battery for ECO start/stop function. |
| |
Model 447.7 with code D50 (Full-width partition wall) with code MJ8 (ECO start/stop function), model 447.7 with code D51 (Full-width partition wall with 1 window) with code MJ8 (ECO start/stop function), model 447.7 with code MJ8 (ECO start/stop function) with code S23 (Two-seater front passenger seat) | |||
4 | Disconnect ground on additional battery for park pawl emergency shift. |
| |
5 | Remove trims (9). | ||
6 | Remove panoramic roof. | ||
7 | Remove windshield. | ||
8 | Remove window airbag. |
| |
Model 447.7/8 with code SH9 (Window airbag for driver and front passenger) except code SH8 (Window airbag for driver, front passenger and rear) except code ZH6 (Marco Polo ACTIVITY) except code ZK7 (MARCO POLO equipment line), model 448.8 with code SH9 (Window airbag for driver and front passenger) except code SH8 (Window airbags for driver, front passenger and rear) | |||
9.1 | Remove front roof strip. | Model 447.7/8 except code D12 (Roof railing) except code D14 (Anodized roof railing), model 448.8 except code D14 (Anodized roof railing) | |
9.2 | Remove roof railing | Model 447.7 with code D12 (Roof railing), model 447.8, 448.8 with code D14 (Anodized roof railing) | |
10 | Remove air ducts from rear air conditioning system. |
| |
11 | Remove brackets (3). | To do this, remove screws (2). | |
12 | Remove the holders (5). | For this purpose, remove bolts (4). | |
13 | Remove screws (6). | Unscrew screws (6) with sleeves (7) downwards. | |
14 | Remove threaded bushings (8) upward. | ||
15 | Remove electrical wiring harness (1). | Remove electrical wiring harness (1) on both sides of vehicle. | |
16 | Remove liftgate. | ||
17 | Install in the reverse order. |
Referenced documents
- ah0000z030001a General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment
- ah6800n000101s Notes on carrying out repair work in the vehicle interior
- ar5410s0003e
- ar5410s0003e Disconnect/connect battery ground line
- ar5410s0004e Disconnect, connect ground line of additional battery
- ar5410s0111e Remove/install additional battery for ECO start/stop function
- ar5410s0111ee Remove/install additional battery for ECO start/stop function
- ar5410s0120e Remove/install additional battery for park pawl emergency shift mode
- ar6710s1000e Remove/install windshield
- ar7220s1020e Remove/install liftgate
- ar7721s0750e Remove/install panoramic roof
- ar7740s5000e Removing and installing roof railing
- ar8350s4000e Remove/install air ducts of rear air conditioning
- ar8880s9580e Remove, install roof railing
- ar9160s0693e Removing, installing windowbag
- ar9160s0693ee Removing, installing windowbag