Removing and installing intermediate plate

AR26.40-P-0330B

27.2.12

TRANSMISSION 717.44 in MODEL 461

TRANSMISSION 717.43 in MODEL 463

P26.40-2013-08

37 Helical gear for 5th gear

42 Gasket

47 Bolt for reverse shaft

49 Intermediate plate

53 Synchronizing ring

56 Synchronizer body

57 Locking ring

50 Gasket

51 Thrust washer (up to end no. 122 8476)

52 Synchronizer body

	Removing
1	Remove rear transmission cover		AR26.30-P-0310B
2.1	Remove intermediate plate (49)	Up to transmission end no. 6041162	AR26.40-P-0330-08A
		 Two-arm puller	*000589883300
		 Puller arms	*126589003400
2.2	Remove intermediate plate (49)	As of transmission end no. 6041163	AR26.40-P-0330-08B
		 Puller	*000589653300
		 Two-arm puller	*000589883300
		 Puller arms	*140589043400
3	Clean and check all parts	 Replace parts if necessary 
		Disassemble and assemble intermediate plate	AR26.40-P-0332A
	Installing
4.1	Install intermediate plate (49)	Up to transmission end no. 6041162	AR26.40-P-0330-09A
			*BA26.40-P-1002-01A
		Loctite 243	*BR00.45-Z-1133-02A
4.2	Install intermediate plate (49)	As of transmission end no. 6041163	AR26.40-P-0330-09B
			*BA26.40-P-1002-01A
		 Pressing-in tool	*123589034300
		Loctite 243	*BR00.45-Z-1133-02A
5	Install rear transmission cover		AR26.30-P-0310B