AR26.40-P-0330-09B | Installing intermediate plate | Model 461 with transmission 717.44 as of transmission end no. 6041163 Model 463 with transmission 717.43 as of transmission end no. 6041163 |
Housing
Pressing-in tool
123 589 03 43 00
Repair materials
Number | Designation | Order number |
BR00.45-Z-1133-02A | Loctite 243 | A 613 989 09 71 |
P26.40-2010-01
1 Press off intermediate plate with main shaft deep-groove ball bearing.
Use new paper gasket. Assist pressing off using a synthetic head hammer.
P26.40-0202-01
When mounting the intermediate plate on the transmission housing ensure that the locking lever (107) engages in the shift lever (76).
P26.40-0219-01
2 Heat up helical gear for 5th gear to approx. 80°C and push on. The wider collar must point towards the tapered roller bearing.
3 Smear hexagon bolt for the reverse shaft (47) with sealing agent and tighten.
P26.40-0218-01
4 Attach synchronizer body (56), helical gear (52) with synchronizing ring (53) to countershaft.
With the helical gear, the needle cage in the helical gear is also installed.
P26.40-0213-01
6 Reduce axial play of synchronizer body to a minimum by using locking rings of different thickness.
Locking rings are available in thicknesses of 1.2 mm, 1.3 mm and 1.4 mm.
7 Install locking ring (57).
Ensure that the locking ring is seated correctly in the groove.