AR26.40-P-0330-08B | Removing intermediate plate | Model 461 with transmission 717.44 as of transmission end no. 6041162 Model 463 with transmission 717.43 as of transmission end no. 6041162 |
000 589 65 33 00
Puller arms
Puller
Two-arm puller
000 589 88 33 00
140 589 04 34 00
P26.40-2011-01
1 Remove anti-rattle washer (arrow).
P26.40-0213-01
2 Remove locking ring (57)
P26.40-0218-01
3 Remove synchronizer body (56), helical gear (52) with synchronizing ring (53) from countershaft.
With the helical gear (52), the needle cage in the helical gear is also removed.
P26.40-0219-01
4 Unscrew hexagon bolt (47) for reverse shaft.
P26.40-0208-01
5 Pull off helical gear (37) for 5th gear using puller.
Puller 000 589 88 33 00
Puller arms 140 589 04 34 00
P26.40-0337-02
6 Pull off intermediate plate using puller.
Puller 000 589 65 33 00
Ensure the puller is seated correctly. Assist pulling off using light blows from a synthetic head hammer.