Removing, installing low temperature cooler

AR07.16-P-1110A

Removing, installing low temperature cooler

9.8.97

 

Removing, installing

1

Remove bottom part of noise encapsulation (1)

AR94.30-P-5300A

 Danger!

Risk of injury to skin and eyes from scalding from hot coolant which splashes out. Risk of poisoning from swallowing coolant.

Do not open the cooling system unless the coolant temperature is below 90 °C. Open cap slowly and allow the pressure to release. Do not pour coolant into containers for drinks.

Wear protective gloves, protective clothes, and eye protection.

AS20.00-Z-0001-01A

2

Drain coolant, pour in

At radiator

AR20.00-P-1142HB

3

Disconnect coolant hoses (2, 3)

 Inspect condition of coolant hoses, replace if necessary.

 Collect coolant which flows out.

4

Remove cover panel (7)

 Remove retaining clips.

5

Pull off clips (4) at front end crossmember (5)

6

Remove front end crossmember (5)

7

Detach hood cable

Place to the side in the engine compartment.

AR88.40-P-3100E

8

Unbolt air duct (9) at low temperature cooler (6)

9

Remove low temperature cooler (6)

 Installation: attach retaining bar (8) to air duct.



*BA07.16-P-1002-02A

10

Install in the reverse order

11

Inspect cooling system for leaks

AR20.00-P-1010HA

Number

Designation

Engine 611.960

BA07.16-P-1002-02A

Bolt of low temperature cooler to radiator

Nm

10