ap4330b4301b

Retarder - oil change

유형 ap · 주제 43.30 · 버전 0601 · 2019-08-29

적용 대상: Model 634.0 with transmission 714.12/14/18

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 2 섀시 › 43 브레이크-공압장치 및 보조브레이크 › 43.30 리타더 (유압식) — 시리즈 634 (모델 0**)

EinPAS 21 브레이크/진공압 시스템/압축 공기 시스템 › 21.21 리타더 › 21.21.30 하우징/커버/샤프트/리타더 — 시리즈 634 (모델 0**)

엔진/변속기에도 적용: 714 12*, 714 14*, 714 18*

AP43.30-B-4301B

Retarder - oil change

21.08.2019

Model

634.0 with transmission 714.12/14/18

Modification notes

22.07.2019

Retarder oil

BA43.30-B-1001-01B

Retarder - oil change

Voith Retarder R115 (on-board)

1

Retarder drain plug (not valid in Brazil)

2

Retarder drain plug

3

Filler plug

4

Retarder drain plug

T43.30-0016-06

1

Clean the vicinities of the retarder drain plug (1), the oil tank (2)

Drain the hot oil while it is hot

2

Remove the drain plugs (1, 2)

Collect the oil in a suitable container and allow it to drain completely.

3

Remove the retarder drain plug (4)

Clean the strainer using a cleaning agent and blow it with compressed air.

4

Screw the drain plugs (1, 2, 4)

Renew the sealing rings. Plugs with integrated sealing plastic rings should be replaced.

Gearbox 714.183 with Code B10 (Retarder Voith 115)Oil draining plug

*BA43.30-B-1002-01B

5

Open maintenance flap over the transmission

6

Clean the area around the filler plug (3)

7

Remove the filling plug (3)

8

Fill the retarder with the prescribed amount of oil

Accurately measure the amount of oil before refilling. Slowly add oil during, at least, 3 minutes.

Gearbox 714.120/124/140/144/145/183 with Code B10 (Retarder Voith 115)Quantity o the retarder oil replenishment

*BF43.30-B-1001-01B

9

Install the filler plug (3)

Renew the sealing rings. Plugs with integrated sealing plastic rings should be replaced.

Gearbox 714.183 with Code B10 (Retarder Voith 115)Oil filling plug

*BA43.30-B-1001-01B

10

Close the maintenance flap over the transmission

11

Bleed the air retarder (lubricant bleeding)

During the course test at a speed of 50 km/h:

Activate the retarder, in the first position of the lever, for 5 seconds and disengage in the sequence;

Repeat this operation 4 or 5 times.

Retarder (hydraulic)

Number

Designation

Gearbox 714.183 with Code B10 (Retarder Voith 115)

BA43.30-B-1001-01B

Oil filling plug

M30x1.5

Nm

100

Retarder (hydraulic)

Number

Designation

Gearbox 714.183 with Code B10 (Retarder Voith 115)

BA43.30-B-1002-01B

Oil draining plug

Nm

80

Retarder (hydraulic)

Number

Designation

Type 634.0 with transmission 714.140/144 with Voith retarder R115

Type 382.177, 634.0 with transmission 714.120/124/145/183 with Voith retarder R115

BF43.30-B-1001-01B

Quantity o the retarder oil replenishment

without replacing the heat exchanger

Litros

7,0

6,7

replacing the heat exchanger

Litros

7,5

7,2

replenishment after repair

Litros

7,8

7,5

Oil class

MB 235.27, MB 235.28, MB 235.29

MB 235.27, MB 235.28, MB 235.29