ap4210d4253c

Check brake lining thickness

유형 ap · 주제 42.10 · 버전 0103 · 2011-08-29

적용 대상: MODEL 901.6, 902.6, 903.6, 904.6, 905.6 as from model year 2003

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 2 섀시 › 42 브레이크-유압장치 및 기계장치 › 42.10 상용 브레이크 — 시리즈 901 (모델 6**) · 시리즈 902 (모델 6**) · 시리즈 903 (모델 6**) · 시리즈 904 (모델 6**) · 시리즈 905 (모델 6**)

EinPAS 21 브레이크/진공압 시스템/압축 공기 시스템 › 21.15 주 브레이크/진공압 시스템 › 21.15.40 전방 서비스 브레이크 — 시리즈 901 (모델 6**) · 시리즈 902 (모델 6**) · 시리즈 903 (모델 6**) · 시리즈 904 (모델 6**) · 시리즈 905 (모델 6**)

EinPAS 21 브레이크/진공압 시스템/압축 공기 시스템 › 21.15 주 브레이크/진공압 시스템 › 21.15.42 후방 서비스 브레이크 — 시리즈 901 (모델 6**) · 시리즈 902 (모델 6**) · 시리즈 903 (모델 6**) · 시리즈 904 (모델 6**) · 시리즈 905 (모델 6**)

AP42.10-D-4253C

Check brake lining thickness

23.8.11

MODEL 901.6, 902.6, 903.6, 904.6, 905.6
as from model year 2003

Check brake lining thickness
Check brake lining thickness

N42.10-0304-01

Shown on front wheel brake

Shown on rear wheel brake

N42.10-2136-01

Removing

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.

AS00.00-Z-0010-01A

1

Remove the rear wheels

Vehicles with twin tires.

AP40.10-D-4040A

Checking

2

Check lining thickness of brake pads in brake caliper

Check the outer brake pads through the top wheel wrench opening (arrow). To illuminate the visual field hold a hand lamp or flashlight at the wheel wrench opening. Check the inner brake pads from the vehicle underside:

Lift/jack up vehicle

AR00.60-D-1000A

If the brake lining thickness of the brake pad is approaching the brake lining wear limit, all brake pads must be checked by removing the wheels.

If the front brake lining thickness is under the brake lining wear limit, the front axle brake pads must be replaced.

Remove/install wheels

AR40.10-D-1100A

Brake lining wear limit

*BE42.10-N-1001-10A

If the rear brake lining thickness is under the brake lining wear limit, the rear axle brake pads must be replaced.

Remove and fit rear wheels

AP40.10-D-4040A

Brake lining wear limit

*BE42.10-N-1001-10A

In the event of single-sided brake wear, the brake caliper (axle by axle) must be checked for condition and ease of movement by removing the wheels.

Install

3

Fit rear wheels

Vehicles with twin tires.

AP40.10-D-4040A

Test and adjustment values for service brake

Number

Designation

Model
690.6, 901,
902, 903,
904

Model 905

BE42.10-N-1001-10A

Brake lining wear limit

mm

2

3

참조 문서