ar0060d1000a

Lift/jack up vehicle

유형 ar · 주제 00.60 · 버전 0102 · 2011-11-03

적용 대상: MODEL 901, 902, 903, 904, 905 MODEL WD1XD141, WD1XD241, WD1XD341, WD1XD441, WD1XD541, WD1XD641, WD1XD741, WD2YD141, WD2YD241, WD2YD341, WD2YD441, WD2YD541, WD2YD641, WD2YD741, WD5WD141, WD5WD241, WD5WD341, WD5WD641, WD5WD741 MODEL 690.6

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 0 전체 › 00 차량-전체 › 00.60 잭업, 견인 — 시리즈 690 (모델 6**) · 시리즈 901 · 시리즈 902 · 시리즈 903 · 시리즈 904 · 시리즈 905

EinPAS 45 데이터/정보 › 45.10 차량 전체 › 45.10.20 차량 전체 — 시리즈 690 (모델 6**) · 시리즈 901 · 시리즈 902 · 시리즈 903 · 시리즈 904 · 시리즈 905

AR00.60-D-1000A

Lift/jack up vehicle

21.10.11

MODEL 901, 902, 903, 904, 905

MODEL WD1XD141, WD1XD241, WD1XD341, WD1XD441, WD1XD541, WD1XD641, WD1XD741,
WD2YD141, WD2YD241, WD2YD341, WD2YD441, WD2YD541, WD2YD641, WD2YD741,
WD5WD141, WD5WD241, WD5WD341, WD5WD641, WD5WD741

MODEL 690.6

Lift/jack up vehicle

D00.60-0005-09

Fig. item etc.

Work instructions

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.

AS00.00-Z-0010-01A

Danger!

Danger of accident from automatic start-off when working on jacked-up vehicle Risk of injury from rotating parts when working on running engine or drive train

Ensure that supports are in a safe condition.

An authorized person must occupy the driver seat.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0008-01A

When removing major assemblies, the vehicle is to be secured against tilting or falling

1

Front support (front axle)

Lift support point at front axle under spring clamp plate.

Can be used for all Sprinters.

2

Front support (transmission carrier)

Except code XM1, noise abatement measure.

3

Rear support (vehicle jack support point at longitudinal frame member)

Can be used on all panel van/crewbus vehicles.

4

Rear support (vehicle jack support point at front rear spring bracket)

Can be used on all cab/crewcab vehicles.

011

Lifting platform

Two-post lifting platform 3.0-3.5 t, electromechanical
gotis://H_00.1_01.0

012

Support plate, short

For front support at front axle under spring clamp plate (1).

All Sprinters.

Unscrew right and left front support plates the same amount!

013

Support plate, long

On vehicle without noise abatement measure, code XM1.

For front support at transmission carrier (2).

Can be used as an alternative to the front support under the front axle.

Unscrew right and left front support plate the same amount!

014

V-block

For rear support at vehicle jack support point (3, 4).

Unscrew right and left rear v-blocks the same amount!

Lifting vehicle with pit lift or workshop jack

Risk of accident! With uneven load distribution, there is a danger that the vehicle slips from the lifting equipment.

AR00.60-D-1000-01A

Pit lift

Pit lift 2.0-7.0 t
gotis://H_00.9_01.0

Floor jack (manual hydraulic)

Floor jack
gotis://H_00.12_01.0

Jack stand
gotis://H_00.12_13.0

참조 문서