AR00.60-D-1000A | Lift/jack up vehicle | 21.10.11 |
MODEL 901, 902, 903, 904, 905
MODEL WD1XD141, WD1XD241, WD1XD341, WD1XD441, WD1XD541, WD1XD641, WD1XD741,
WD2YD141, WD2YD241, WD2YD341, WD2YD441, WD2YD541, WD2YD641, WD2YD741,
WD5WD141, WD5WD241, WD5WD341, WD5WD641, WD5WD741
MODEL 690.6
D00.60-0005-09
Fig. item etc. | Work instructions | ||
Danger! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer. | |
Danger! | Danger of accident from automatic start-off when working on jacked-up vehicle Risk of injury from rotating parts when working on running engine or drive train | Ensure that supports are in a safe condition. An authorized person must occupy the driver seat. | |
| When removing major assemblies, the vehicle is to be secured against tilting or falling | ||
1 | Front support (front axle) | Lift support point at front axle under spring clamp plate. Can be used for all Sprinters. | |
2 | Front support (transmission carrier) | Except code XM1, noise abatement measure. | |
3 | Rear support (vehicle jack support point at longitudinal frame member) | Can be used on all panel van/crewbus vehicles. | |
4 | Rear support (vehicle jack support point at front rear spring bracket) | Can be used on all cab/crewcab vehicles. | |
011 | Lifting platform | Two-post lifting platform 3.0-3.5 t, electromechanical | |
012 | Support plate, short | For front support at front axle under spring clamp plate (1). All Sprinters. Unscrew right and left front support plates the same amount! | |
013 | Support plate, long | On vehicle without noise abatement measure, code XM1. For front support at transmission carrier (2). Can be used as an alternative to the front support under the front axle. Unscrew right and left front support plate the same amount! | |
014 | V-block | For rear support at vehicle jack support point (3, 4). Unscrew right and left rear v-blocks the same amount! | |
| Lifting vehicle with pit lift or workshop jack | Risk of accident! With uneven load distribution, there is a danger that the vehicle slips from the lifting equipment. | |
Pit lift | Pit lift 2.0-7.0 t | ||
Floor jack (manual hydraulic) | Floor jack | ||
Jack stand |
Referenced documents
- ar0060d100001a Lifting vehicle with pit lift or workshop jack
- ar0060d100001a
- as0000z000801a Risk of accident caused by vehicle starting off on its own when jacked up. Risk of injury caused by rotating parts when working on running engine or drive train.
- as0000z001001a Risk of death caused by vehicle slipping or toppling off of the lifting platform.