2 | Engine radiator |
3 | Drain screw |
G20.00-3132-11
Shown on engine 471.9 |
4 | Fuel filter module |
5 | Coolant drain fitting (on crankcase) |
W20.00-1059-11
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
Warning | Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant. | Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. | |
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
Drain off | |||
1 | Remove cap of coolant expansion reservoir and relieve overpressure in cooling circuit | For installation location of coolant expansion reservoir, see information of bodybuilder. | |
2 | Set heater to the max. heat output and switch on ignition | Only for engine with heating system. | |
3 | Make a filling unit available | ||
| 000 588 02 82 00 Filling unit | ||
4 | Open drain screw (3), drain coolant at radiator (2) and collect with filling unit | Catch coolant with filling unit only. The coolant will be cleaned through a filter during filling. | |
5 | Attach drain hose to coolant drain fitting (5) | Use a commercially available hose as a drain hose. | |
6 | Open coolant drain fitting (5), drain engine coolant and collect with filling unit | ||
7 | Switch off ignition | ||
8 | Remove drain hose and tighten down coolant drain fitting (5) | ENGINE 470.9Coolant drain fitting to oil/coolant module | |
ENGINE 471.9, 473.9Coolant drain fitting to crankcase | |||
9 | Tighten drain screw (3) on engine radiator (2) | Drain screw to engine radiator | |
| Check | ||
10 | Check drained off coolant for contamination | In the case of strong fouling, the coolant must generally be replaced. | |
If the coolant is dirt-laden too strongly. | |||
| |||
Deoil engine cooling system. | |||
11 | Check coolant with an antifreeze tester | See information from body manufacturer. | |
When antifreeze protection is too low | |||
| |||
Correct concentration of antifreeze or replace the coolant. | |||
Filling and bleed using the diagnostic system | |||
12 | Connect diagnostic system, select filling of the coolant circuit and start | ||
| Coolant specifications | ||
| Anticorrosion agent/antifreeze (specification 325.5) | ||
| Premixed coolant (specification 326.5) | ||
| 000 588 02 82 00 Filling unit | ||
| |||
Connect vehicle diagnosis system, see information of bodybuilder. | |||
The process is completely menu-assisted under: | |||
Only fill coolant with filling unit. The coolant will be cleaned through a filter during filling. | |||
13 | Stop diagnostic system and disconnect | ||
| Check | ||
14 | Check engine cooling system for leaktightness | Visual inspection. |
参照文書
- ah0000n500001h 汚れおよび異物による損傷防止に関する注意事項
- ar2000g1250h
- as0000z000201a 高温になっているか、あるいは赤熱している部品を取り扱う場合に、火傷を負うあるいは失明する危険があります。
- as0000z000501a エンジン作動中に車両がひとりでに動き出す危険があります。 スタート時または作動中のエンジンに接触すると、巻き込まれて負傷をする、または火傷をする危険があります。
- as2000z000101a 高温のクーラントが高圧で噴出して、皮フおよび目に火傷を負う危険があります。クーラントを誤飲すると、中毒になる危険があります。
- bb0040p031001a クーラント規定
- bb0040p032505a
- bb0040p032505a 防錆凍結防止液 (明細仕様 325.5)
- bb0040p032605a 混合クーラント (明細仕様 326.5)
- ws2000n3010b 000 588 02 82 00 充填装置