Transmission | 715.358 in model 958.0/1 |
Transmission | 715.372 in model 958.4 |
Transmission | 715.382 in model 958.4 |
Transmission | 715.388 in model 958.4 |
Transmission | 715.517 in model 958.2 |
Transmission | 715.527 in model 958.4 |
Transmission | 715.531 in model 958.4 |
Transmission | 715.535 in model 958.2 |
Transmission | 715.563 in model 693 |
Transmission | 715.565 in model 693 |
Transmission | 715.567 in model 958.2 |
Transmission | 715.568 in model 958 |
Represented on Transmission 715.5 |
1 | Fastening pin |
2 | Sealing rings |
3 | Valve element |
4 | Actuator valve |
5 | Spring (short) |
6 | Valve element |
7 | Sealing ring |
8 | Actuator valve |
9 | Spring (long) |
10 | Plug (only vehicles without code (N55) gearbox oil cooling) |
11 | Compensating shim |
12 | Oil pump housing |
13 | Oil pump driven gear |
14 | Oil pump drive gear |
15 | Oil pump cover |
16 | Sealing ring |
W26.55-1037-06
| Remove | ||
1.1 | Remove rear cover | Gearbox without power take-off | |
. | |||
1.2 | Remove the power take-off | Gearbox with power take-off | |
NA 121 power takeoff | |||
NA 123, 124 power takeoff | |||
NA 125 -10b power takeoff | |||
Power take-off NA 125-11b/2c, 125-11 c/2c | |||
Power take-off NA 125-11 b/1b, 125-11 b/1c | |||
Power take-off NA 131 | |||
Gearbox with power take-off | |||
2 | Remove the oil pump housing (12), the oil pump cover (15), the driven gear (13) and the drive gear (14) and remove the compensation shim (11) | ||
| |||
The oil pump cover (15) is installed only in vehicles with power take-off. | |||
3.1 | Remove the valves elements (3) and (6) with the actuation valves (4) and (8) and the springs (5) and (9) | Gearbox without code (N55) gearbox oil cooling. | |
The valve elements (3) and (6) are under the spring tension. | |||
3.2 | Remove the plug (10) the actuation valve (8), the valve element (6) and the spring (9) | Gearbox without code (N55) gearbox oil cooling. | |
The valve element (6) is under the spring tension. | |||
| Install | ||
4 | Determine the compensation shim (11) for the oil pump |
| |
.Oil pump clearance | |||
5 | Place the determined compensation shim (11) in the rear housing | The oil pump housing pin (12) must fit through the compensation shim (11) in the rear housing cavity. | |
6 | Install the driven (13) and drive gears (14) of the oil pump | Grease the oil pump gears. | |
The marks (arrows) in the driven (13) and drive gear (14) from the oil pump must be turned to the oil pump cover (15) or to the rear cover. | |||
7 | Install the oil pump cover (15) | Only vehicles with power take-off. | |
. | |||
Replace the sealing ring (16). | |||
8.1 | Install the valves elements (3) and (6) with the actuation valves (4) and (8) and the springs (5) and (9) | Gearbox with code (N55) gearbox oil cooling | |
The attachment pin (1) in the "9 o'clock" position (shifting direction). | |||
Replace the seal rings (2) and (7) and pay attention to the difference in the springs length (5) and (9). | |||
8.2 | Install the plug (10) the actuation valve (8), the valve element (6) and the spring (9) | Gearbox without code (N55) gearbox oil cooling | |
Replace the sealing rings (2) and (7). | |||
9.1 | Install rear cover | Gearbox without power take-off | |
. | |||
9.2 | Install the power take-off | Gearbox with power take-off | |
Power take-off NA 121 | |||
Power take-off NA 123, 124 | |||
Power take-off NA 125 -10b | |||
Power take-off NA 125-11b/2c, 125-11 c/2c | |||
Power take-off NA 125-11 b/1b, 125-11 b/1c | |||
Power take-off NA 131 |