Remove/install PTO

Documenti citati

AR26.45-B-0001TC

Remove/install PTO

12.02.16

Manual transmission 715.3, 715.5 with CODE N04 (PTO, layshaft MB, 1b)

Manual transmission 715.3, 715.5 with CODE N07 (PTO, layshaft MB, 2b)

Manual transmission 715.3, 715.5 with CODE N05 (PTO, layshaft MB, 2c)

W26.45-1221-06

Represented on gearbox 715.5

1 Oil pump cover

2 Sealing ring

3 Input shaft

4 Ball bearing

5 Snap-ring

6 Centering ring

7 Sealing gasket

8 Power take-off

9 Control switch connector

10 Compressed air pipe

11 Solenoid valve connector

	Remove and install
	Indications on self-locking bolts and nuts		AH00.00-B-0001-01A
	Indications on compressed air connection systems		AH00.18-B-0001-01A
1	Drain and catch the gearbox oil	Gearbox 715.372/382/504/506/517/527/531/563/565/567/568/576	AP26.00-B-2601A
2	Remove the gearbox output flange	Gearbox 715.372/382/504/506/517/527/531/563/565/567/568/576	AR26.40-B-0007TA
		Gearbox 715.576	AR26.40-B-0007TD
3	Depressurize the circuit 4 of the compressed air system
4.1	Remove transmission shaft from the power take-off (8)	Power take-off without hydraulic pump.
			*BA41.20-B-1001-01D
4.2	Remove the hydraulic pump	Power take-off with hydraulic pump.	AR26.45-B-0002TC
		 Do not detach the hydraulic pipes, only if necessary.
5	Remove the compressed air pipe (10)	With compressed air connection "VOSS 230"	AR42.10-B-0900TA
		With compressed air connection "VOSS 232" (NG 8, 12) OR "SCHAFER SDF" (NG 6)	AR42.10-B-0900TC
6	Remove the electric connectors from the solenoid valve (11) and on the control switch (9)
7	Remove the power take-off (8)	Installing: Replace the sealing gasket (7) and apply chemical lock on the bolts.	*BR00.45-B-1029-02B
			*BA26.45-B-1003-01B
8	Remove the input shaft (3) with the ball bearing (4) and the centering ring (6)	 Installing: Check the input shaft (4) for wear, if necessary, replace.
9	Remove the oil pump cover (1)	 Only when changing the gearbox or when retrofitting a power take-off.
		 Installing: Replace the sealing ring (2).
	Modified rear cover	Gearboxes 715.5 as from gearbox number ending 0224564.	BT26.30-B-3001-01A
10	Install in reverse order
11	Fill the gearbox with oil and correct the level	Gearbox 715.372/382/504/506/517/527/531/563/565/567/568/576	AP26.00-B-2601A

PTO

PTO propeller shaft

Número	Denominação			Gearboxes 715.3, 715.5 with NA 121/123/125 PTO


BA41.20-B-1001-01D	Attachment screws of transmission flanges with power outlet	M8	Nm	23
		M10	Nm	60
		M12	Nm	-

Produtos para reparos

Número	Denominação	Número de pedido
BR00.45-B-1029-02B	Surfaces sealing product Loctite 5203	Henkel Loctite

Denominação

Gearbox 715.5 with CODE N05

Gearbox 715.3, 715.3, with CODE N04 - NA121 B

BA26.45-B-1003-01B

Power take-off attachment bolts in the gearbox