Remove/install hydraulic pump

AR26.45-B-0002TC

12.02.16

Manual transmission 715.372, 715.504, 715.517, 715.527, 715.531, 715.567, 715.568, 715.576

Manual transmission 715.563 with Vehicle 693

Manual transmission 715.565 with Vehicle 693

W26.45-0064-11

1 Hydraulic pump

2 Nut

3 Sealing gasket

4 Intermediate flange

	Remove and install
Danger!	Risk of injury on skin and eyes by ejected high pressure hydraulic fluid. Risk of poisoning by ingestion of hydraulic fluid	Before starting a job in a hydraulic system, relieve the pressure in the system. Use protection clothes and goggles.	AS00.00-B-0013-01A
1	Detach the hydraulic pipes on the pump (1)	 Catch the hydraulic oil in an appropriate container.
2	Remove the hydraulic pump (1) and lift out the intermediate flange (4)	 Catch the oil run-off in an adequate container.
		Installing: Clean the sealing surfaces and replace the sealing gasket (3).
			*BA26.45-B-1013-01B
3	Install in reverser order
4	Check the hydraulic oil level in the reservoir, and correct if necessary	 Follow the maker's instructions for service and maintenance.
5	Fill the gearbox with oil and correct the level	Gearbox 715.372/504/517/527/531/563/565/567/568/576	AP26.00-B-2601A

PTO

Número	Denominação		Gearbox 715.3, 715.3, with CODE N04 - NA121 B


BA26.45-B-1013-01B	Hydraulic pump nut in the power take-off	Nm	70