Transmission | 715.358 in model 958.0/1 |
Transmission | 715.372 in model 958.4 |
Transmission | 715.382 in model 958.4 |
Transmission | 715.388 in model 958.4 |
Transmission | 715.517 in model 958.2 |
Transmission | 715.527 in model 958.4 |
Transmission | 715.531 in model 958.4 |
Transmission | 715.535 in model 958.2 |
Transmission | 715.563 in model 693 |
Transmission | 715.565 in model 693 |
Transmission | 715.567 in model 958.2 |
Transmission | 715.568 in model 958.2 |
Transmission 715.5, old version |
1 | Oil pump actuation axle |
2 | Lock-ring |
3 | Ball bearing |
4 | Rear cover |
5 | Relief valve (only for vehicles without Code (N55) transmission oil cooling) |
6 | Relief valve with bypass valve (only for vehicles with code (N55) transmission oil cooling) |
7 | Long spring |
8 | Short spring |
W26.30-1022-06
Transmission 715.3/5 updated version |
1 | Oil pump actuation axle |
2 | Lock-ring |
3 | Ball bearing |
4 | Rear cover |
5 | Relief valve (only for vehicles without Code (N55) transmission oil cooling) |
6 | Relief valve with bypass valve (only for vehicles with code (N55) transmission oil cooling) |
7 | Long spring |
8 | Short spring |
W26.30-1021-06
| Remove | ||
1 | Drain and collect the transmission oil | ||
2 | Remove the rear cover (4) | ||
| . | ||
The relief valve (5) or the relief valve with bypass (6) is under the spring tension. | |||
3.1 | Remove the relief valve (5) | Transmission without code (N55) transmission oil cooling. | |
3.2 | Remove the relief valve with bypass (6) | Transmission with code (N55) transmission oil cooling. | |
4 | Remove the oil pump actuation axle (1) | ||
5 | Remove the oil pump |
| |
| Install | ||
6 | Inspect the ball bearing (3) | In case the ball bearing (3) is damaged or worn-out: | |
| |||
it must be replaced. | |||
7 | Clean the rear cover (4) and the rear housing's contact surfaces | ||
8 | Install the oil pump |
| |
9 | Install the oil pump actuation axle (1) | ||
10.1 | Install the relief valve (5) | Transmission without code (N55) transmission oil cooling. | |
10.2 | Install the relief valve with bypass (6) | Transmission without code (N55) transmission oil cooling. | |
The pin which is on the relief valve with by pass (6), must be assembled in the "9 o'clock" position. | |||
11 | Install the rear cover (4) | Put a sealing product on the rear cover contact surface (4). | |
Loctite 5203 surface sealant | |||
Transmission 715.517/527/565/567/568Oil pump cover | |||
Transmission 715.358/372/382/388/531/535Oil pump cover | |||
12 | Refuel with the transmission oil and correct the level |
| |
Transmission without the code (G02) torque converter (WSK). |