ar9160p0750rt

Remove/install frontal acceleration sensor

Tyyppi ar · aihe 91.60 · versio 0200 · 2006-08-08

Koskee: MODEL 251

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

Sijainti

Toimintoryhmä 3 Kori, päällysrakenne › 91 Istuimet, lepotasot, turvavyöt, turvavöiden kiristimet, turvatyynyt › 91.60 Turvatyyny, jalankulkijasuoja — Mallisarja 251

EinPAS 27 Passiivinen turvallisuus/turvavarusteet › 27.16 Turvatyyny › 27.16.12 Tunnistin/katkaisin/johtosarja — Mallisarja 251

EinPAS 27 Passiivinen turvallisuus/turvavarusteet › 27.17 Turvavarusteet › 27.17.12 Tunnistin/katkaisin/johtosarja — Mallisarja 251

AR91.60-P-0750RT

Remove/install frontal acceleration sensor

3.8.06

MODEL 251

Remove/install frontal acceleration sensor

P91.60-2985-06

1 Electrical connector

2 Bolt

B48/1 Driver-side frontal acceleration sensor

B48/2 Passenger-side frontal acceleration sensor

Remove/install frontal acceleration sensor

P91.60-2986-11

Shown on driver-side frontal acceleration sensor (B48/1)

2 Bolt

B48/1 Driver-side frontal acceleration sensor

Modification notes

26.7.06

"Disconnect/connect battery ground line" removed

Step 1

Remove/install

Danger!

Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.

Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply.

AS91.00-Z-0001-01A

Notes on avoiding damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

1

Open engine hood

2

Disconnect electrical connector (1) from driver-side frontal acceleration sensor (B48/1) or from passenger-side frontal acceleration sensor (B48/2)

3

Unscrew bolt (2) and remove driver-side frontal acceleration sensor (B48/1) or passenger-side frontal acceleration sensor (B48/2) from the body

Installation: Fit driver-side frontal acceleration sensor (B48/1) or passenger-side frontal acceleration sensor (B48/2) in the depicted installation position (different installation position depending on side of vehicle), inserting the positioning drifts (arrows A) into the holes in the body.

*BA91.60-P-1002-01K

4

Install in the reverse order

Airbag

Number

Designation

Model 251 except USA version (code 494a)

Model 251 with
USA version (code 494a)

BA91.60-P-1002-01K

Bolt, frontal acceleration sensor to front module support

Nm

8

8

Viitatut asiakirjat