Remove/install frontal acceleration sensor · ar9160p0750rt · Mercedes-Benz WIS

AR91.60-P-0750RT

Remove/install frontal acceleration sensor

3.8.06

MODEL 251

P91.60-2985-06

1 Electrical connector

2 Bolt

B48/1 Driver-side frontal acceleration sensor

B48/2 Passenger-side frontal acceleration sensor

P91.60-2986-11

Shown on driver-side frontal acceleration sensor (B48/1)

2 Bolt

B48/1 Driver-side frontal acceleration sensor

Modification notes

26.7.06

"Disconnect/connect battery ground line" removed

Step 1

 	Remove/install
 Danger!	Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.	Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply.	AS91.00-Z-0001-01A
	Notes on avoiding damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
1	Open engine hood
2	Disconnect electrical connector (1) from driver-side frontal acceleration sensor (B48/1) or from passenger-side frontal acceleration sensor (B48/2)
3	Unscrew bolt (2) and remove driver-side frontal acceleration sensor (B48/1) or passenger-side frontal acceleration sensor (B48/2) from the body	 Installation: Fit driver-side frontal acceleration sensor (B48/1) or passenger-side frontal acceleration sensor (B48/2) in the depicted installation position (different installation position depending on side of vehicle), inserting the positioning drifts (arrows A) into the holes in the body.
			*BA91.60-P-1002-01K
4	Install in the reverse order

 Airbag

Number	Designation		Model 251 except USA version (code 494a)	Model 251 with USA version (code 494a)


BA91.60-P-1002-01K	Bolt, frontal acceleration sensor to front module support	Nm	8	8

ah5400p000101a Information on preventing damage to electronic components due to electrostatic discharge
as9100z000101a Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.