gf9130p2002a

Switching over heated seats, function

Type gf · topic 91.30 · version 0102 · 1999-05-11

Applies to: MODEL 168, 170, 210 up to 30.6.99 with CODE (873) Electrically heated left and right front seats MODEL 202 as of 1.9.95 with CODE (873) Electrically heated left and right front seats MODEL 210 with CODE (872) Electrically heated left and right rear seats MODEL 210 as of 1.7.99 with CODE (873) Electrically heated left and right front seats except CODE (401a) Front seat ventilation

Where it sits

Function group 3 Body › 91 Seats, bunks, restraint systems › 91.30 Seat heater, seat ventilation — Series 168 · Series 170 · Series 202 · Series 210

GF91.30-P-2002A

Switching over heated seats, function

7.5.96

MODEL 168, 170,
210 up to 30.6.99 with CODE (873) Electrically heated left and right front seats

MODEL 202 as of 1.9.95 with CODE (873) Electrically heated left and right front seats

MODEL 210 with CODE (872) Electrically heated left and right rear seats

MODEL 210 as of 1.7.99
with CODE (873) Electrically heated left and right front seats
except CODE (401a) Front seat ventilation

Switching over heated seats, function

P91.30-0282-06

Models 170, 202, 210

N25/5 Front heated seat (HS) control module

N25/5s1 Left front heated seat (HS) switch

N25/5s2 Right front heated seat (HS) switch

Model 210

N25/6 Rear heated seat (HS) control module

S51/3 Left rear heated seat switch

S51/4 Right rear heated seat switch

Model 168

S6/2n1 Heated seat control module

S6/2s5 Left heated seat switch

S6/2s6 Right heated seat switch

Switching over with switch

Function sequence

1 Function prerequisites:

Heated seat switched on, heating stage "1" or "2". One or both LEDs in the heated seat switch indicate the selected heating stage.

2 Switching over from heating stage "1" to "2"or from "2" to "1", actuated by actuating the switch position not previously actuated on the heated seat switch once.

3 The heated seat control module reduces or increases the electrical power output for the heating elements in the seat depending on the heating stage selected.

4 Switchover is indicated by one or both LEDs in the heated switch coming on.

Automatic switchover to heating stage "1" after expiration of heat-up time

Function sequence

1 Function prerequisites:

Heated seat switched on, heating stage "2". Both LED's in the heated seat switch indicate the selected heating stage.

2 After reaching the maximum heat-up time of approx. 5 min., the heated seat control module automatically switches over from heating stage "2" to heating stage "1" to reduce the power consumption.

3 The heated seat control module reduces the electrical power for the heating elements in the seat and switches off the second LED in the heated seat switch.

Heated seat/seat ventilation switch, location/purpose

GF91.30-P-3004B

Heated seat and seat ventilation control module, location/purpose

GF91.30-P-3005B

Referenced documents