gf8030p2004a

Function of drive authorization system stage 2b

Type gf · topic 80.30 · version 0102 · 1999-06-11

Applies to: MODEL 129, 140 as of 1.6.97 MODEL 170 as of 1.6.97 except CODE (491) USA version except CODE (498) Japanese version MODEL 170 as of 1.2.97 with CODE (491) USA version MODEL 170 as of 1.3.97 with CODE (498) Japanese version

Where it sits

Function group 3 Body › 80 Central locking system, convenience operation, drive authorization systems › 80.30 Infrared remote control — Series 129 · Series 140 · Series 170

GF80.30-P-2004A

Function of drive authorization system stage 2b

6.12.96

MODEL 129, 140 as of 1.6.97

MODEL 170 as of 1.6.97
except CODE (491) USA version
except CODE (498) Japanese version

MODEL 170 as of 1.2.97 with CODE (491) USA version

MODEL 170 as of 1.3.97 with CODE (498) Japanese version

Function of drive authorization system stage 2b

P80.30-0384-06

System interlinkage

A1 Instrument cluster

CAN Controller area network

L11 Transponder coil

N54/3 Radio frequency DAS control module (model 170)

N54/4 Radio frequency/infrared DAS control module (models 129, 140)

S2/1 Ignition/starter switch

X11/4 Data link connector

1 Radio frequency/infrared remote control key with transponder

2 Engine control module

3 Engine

The drive authorization system stage 2b corresponds to drive authorization system stage 2a.

If a valid transponder signal is recognized from the RF DAS control module (N54/3) (model 170) or radio frequency/infrared DAS control module (N54/4) (models 129/140), after the ignition is switched "ON", the engine control is released.

Function of engine control release

GF80.30-P-3004B

Referenced documents