GF07.61-P-3012F | ME-SFI fuel pump actuation function | 10.7.96 |
ENGINE 104.941 /943 /944 /991 /994 as of 1.8.96
ENGINE 104.995
with CODE (494) USA version
with CODE (807) Model year 1997
with CODE (808) Model year 1998
with CODE (498) as of Model Year 97 Japan version
ENGINE 111.921 /942 as of 1.9.98,
111.943,
111.944 as of 1.8.96,
111.946 as of 1.6.98,
111.947 /973,
111.975 as of 1.8.96
ENGINE 111.945
in MODEL 208.335 /435 as of 1.6.98,
202.020 /080 as of 1.9.98
ENGINE 111.974
with CODE (494) USA version
with CODE (807) Model year 1997
with CODE (808) Model year 1998
ENGINE 112.910 /911 /912 /913 /914 /917 /920 /921 /922 /923 /940 /941 /942 /943 /944 /947 /949 /954 /955 /970 /972 /975
ENGINE 113.940 /941 /942 /943 /948 /960 /961 /965 /966 /967 /968 /969
ENGINE 119.980 /981 /982 /985
ENGINE 120.982 /983
ENGINE 137.970
ENGINE 112.916 /946 /953 /973 up to Model Year 8
ENGINE 113.963 up to Model Year 8
P07.61-0377-06
Shown on Engine 119
55 Fuel filter 75 Fuel tank
K27 Fuel pump relay module
Model 129, 140, 202, 208
Model 210 as of 3/97
K40 Relay module model 170,
model 210 up to 2/97
K40/4 Fuse and relay module
Model 202
Model 210 as of 3/97
Model 163 designation F1
L5 Crankshaft position sensor
M3 Fuel pump (FP)
N3/10 ME-SFI control unit
N16/1 Base module
S2/1 Ignition/starter switch
Y62 Injectors (LH-SFI, HFM-SFI, PEC
[LH, HFM, PMS])
Task
Actuating fuel pump at
Ignition ON: Actuate fuel pump for about 1 s (audible) as a full running protection. An engine start must be completed, however, before repeated actuation of the fuel pump.
when starting engine via the first signals of the crankshaft position sensor (L5/5 on Engine 120)
When engine running by means of TN engine speed signal.
Design/function
The fuel is actuated through the fuel pump relay.
The fuel pump relay is actuated through a ground signal from the ME control unit. When the contact is closed, the fuel pump (M3) is linked through circuit 87 to circuit 30 (B+). The voltage supply is fused to the fuel pump.
On engine 120, the fuel pump is actuated by the right ME-SFI control unit (N3/12).
If the fuel pump does not run, check the voltage supply of the ME control unit and the fuse of the fuel pump.
Check electric connection at fuel pump for corrosion.
Fuel pump location/task/design/function | |||
Fuel delivery module, location/task/design/function | Model 163 | ||
Model 203, 209, 211 | |||
Engine speed signal function | |||
Crankshaft position sensor, location/task/design/function | |||
Fuel pump relay, location/task/design/function | |||
Relay module position / task / design / function | Model 210 up to 2/97 Model 170 | ||
Motor electronics control unit, location/task/design/function | |||
Voltage supply of ME-SFI control unit function | |||
Electronic ignition switch control unit, location/task/design/function | Model 202 as of 6/97, 208, 210 (ausser 210.081/281) as of 3/97 | ||
Model 215, 220 | |||
Model 203, 209 | |||
| Ignition/starter switch (S2/1) | Circuitry of circuit 50 refer to wiring diagrams group 15, 54 |
Referenced documents
- gf0704p4116f Crankshaft position sensor, location/task/design/function
- gf0761p3017f ME engine speed signal function
- gf0761p5000f ME-SFI control unit position / task / design / function
- gf0761p5001f Voltage supply of ME-SFI control unit function
- gf4720p4003l Fuel pump, location/task/design/function
- gf4720p4101gh Fuel delivery module location/task/design/function
- gf4720p4101p Fuel delivery module location/task/design/function
- gf5410p4033k Relay module position/task/design/function
- gf5415p4105l Fuel pump relay position / task / design / function
- gf8057p4102a Electronic ignition switch control module, location/purpose/design/function
- gf8057p4102pp Electronic ignition switch control unit, location/task/design/function
- gf8057p4102s Electronic ignition/starter switch control module, location/purpose/design/function