Model | 930, 932, 933, 934 |
with code DD2 (Cab with 1550 mm floor-to-ceiling height) | |
with code F02 (L-cab, single-cab) | |
except code DD1 (Cab with 1400 mm floor-to-ceiling height (car transporter)) | |
except code EX3 (Provision for fitting telematics) | |
except code F04 (L-cab) | |
except code F05 (M-cab) | |
except code F07 (Cab) | |
except code F15 (MEGASPACE cab) | |
except code F18 (MEGASPACE cab/single cab) | |
Model | 930, 932, 933, 934 |
with code DD2 (Cab with 1550 mm floor-to-ceiling height) | |
with code F04 (L-cab) | |
except code DD1 (Cab with 1400 mm floor-to-ceiling height (car transporter)) | |
except code EX3 (Provision for fitting telematics) | |
except code F02 (L-cab, single-cab) | |
except code F05 (M-cab) | |
except code F07 (Cab) | |
except code F15 (MEGASPACE cab) | |
except code F18 (MEGASPACE cab/single cab) | |
Model | 930, 932, 933, 934 |
with code DD2 (Cab with 1550 mm floor-to-ceiling height) | |
with code F05 (M-cab) | |
except code DD1 (Cab with 1400 mm floor-to-ceiling height (car transporter)) | |
except code EX3 (Provision for fitting telematics) | |
except code F02 (L-cab, single-cab) | |
except code F04 (L-cab) | |
except code F07 (Cab) | |
except code F15 (MEGASPACE cab) | |
except code F18 (MEGASPACE cab/single cab) | |
Model | 930, 932, 933, 934 |
with code DD2 (Cab with 1550 mm floor-to-ceiling height) | |
with code F07 (Cab) | |
except code DD1 (Cab with 1400 mm floor-to-ceiling height (car transporter)) | |
except code EX3 (Provision for fitting telematics) | |
except code F02 (L-cab, single-cab) | |
except code F04 (L-cab) | |
except code F05 (M-cab) | |
except code F15 (MEGASPACE cab) | |
except code F18 (MEGASPACE cab/single cab) |
A119 | FleetBoard vehicle computer |
A120 | FleetBoard DispoPilot |
W82.85-1668-06
| Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove | ||
1 | Disconnect ground line from battery | ||
| |||
2 | Remove footwell cover on the front passenger side | ||
| |||
3 | Remove paneling at top for instrument panel on the passenger side | ||
| Vehicles with CODE FN1 (Distributor cockpit) | ||
| Vehicles with CODE FN2 (Comfort cockpit) | ||
4 | Remove center air vent | ||
| |||
5 | Remove paneling from passenger-side A-pillar | ||
| |||
The support rod must be reattached to the A-pillar for the duration of the installation process after removing the paneling. | |||
6 | Remove all roof stowage compartments | ||
7 | Remove digital tachograph (DTCO) | Only on vehicles with digital tachograph (DTCO). | |
| |||
| Install | ||
8 | Retrofitting multifunction antenna | ||
Model 930, 932, 933, 934 with body 943.899Nut, multifunction antenna to roof | |||
9 | Retrofit main wiring harness for FleetBoard® telematics platform preinstallation |
| |
Vehicles without code EX8 (Preinstallation for route-related toll calculation), with code MS4 (BlueTec 4 (Euro IV)) or with code MS5 (BlueTec 5) | |||
Vehicles with code EX8 (Preinstallation for route-related toll calculation), without code MS4 (BlueTec 4 (Euro IV)) or without code MS5 (BlueTec 5) | |||
Vehicles with code EX8 (Preinstallation for route-related toll calculation), with code MS4 (BlueTec 4 (Euro IV)) or with code MS5 (BlueTec 5) | |||
Note connection diagram. | |||
| |||
Electrical connection scheme for FleetBoard® telematics when retrofitting | |||
10 | Retrofit FleetBoard DispoPilot wiring harness (A120) | ||
11 | Retrofit equipment installation frame |
| |
12 | Connect and install FleetBoard vehicle computer (A119) | ||
13 | Prepare FleetBoard DispoPilot (A120) for installation | ||
14 | Connect and install FleetBoard DispoPilot (A120) | ||
15 | Fill out FleetBoard® commissioning form and send by fax | ||
| FleetBoard initial startup, form | ||
The FleetBoard® administrator will establish contact after receiving the fax to log the vehicle into the FleetBoard® server. | |||
16 | Install digital tachograph (DTCO) | Only on vehicles with digital tachograph (DTCO). | |
| |||
17 | Install all roof stowage compartments | ||
18 | Install paneling to passenger-side A-pillar | ||
| |||
19 | Install paneling at top for instrument panel on the passenger side | ||
| Vehicles with CODE FN1 (Distributor cockpit) | ||
| Vehicles with CODE FN2 (Comfort cockpit) | ||
20 | Install center air vent | ||
| |||
21 | Install footwell cover at front passenger side | ||
| |||
22 | Connect ground cable to battery | ||
| |||
23 | Adapt software in base module (GM) | Only on vehicles up to vehicle identification end number L 075171. | |
| |||
24 | Enable FleetBoard vehicle computer (A119) in vehicle using diagnostic system | ||
Update Vehicle Documentation (VeDoc) | |||
25 | Attach note "Retrofit of FleetBoard DispoPilot as per AZ82.85-W-2005E performed" under field organization texts to DG 82 |
Parts ordering note |
Part no. | Designation | Quantity |
A 930 002 41 99 | FleetBoard® preinstallation parts kit, code EX3 | 1 |
A 930 002 45 99 | FleetBoard® vehicle computer | n.B. |
A 930 002 42 99 | Parts kit for device installation frame on left-hand drive vehicle | n. B. |
A 930 002 43 99 | Parts kit for device installation frame on right-hand drive vehicle | n. B. |
A 930 002 51 99 | DispoPilot mobile upgrade parts kit | 1 |
A 930 002 54 99 | Universal bracket for DispoPilot Truck | 1 |
A 004 545 21 40 | RAM Mount bracket | 1 |
Ordering address for operating instructions. Within Germany: Via the After-Sales Portal on the Internet or via e-mail: [email protected], phone: +49-(0) 1805/010-7979, fax: +49-(0) 1805/010-7978. Outside Germany: Please consult the contact person responsible for your market. | ||
6462 2734 76 | FleetBoard® operator's manual in German, English, French, Polish, Czech, Romanian, Bulgarian, Dutch, Italian, Spanish | n. B. |
6462 2732 41 | DispoPilot operator's manual in German, English, French | n. B. |
6462 2732 76 | DispoPilot operator's manual in Polish, Czech, Romanian, Bulgarian | n. B. |
6462 2733 76 | DispoPilot operator's manual in Dutch, Italian, Spanish | n. B. |
Referenced documents
- ah5400p000101a Information on preventing damage to electronic components due to electrostatic discharge
- ar5410w0003a Disconnect/connect battery ground line
- ar5421w1241a Adapt software in the base module
- ar5461w0006a
- ar5461w0006a Remove/install digital tachograph (DTCO)
- ar6810w3435ac Remove, install upper paneling for instrument panel on passenger side
- ar6810w3435ad Remove, install upper paneling for instrument panel on passenger side
- ar6830w1300mp Remove/install footwell cover on passenger side
- ar6830w4050a Remove/install paneling on A-pillar
- ar8310w4503b Remove and install center air vent
- az8285w000105f Retrofit Fleetboard Telematics platform main wiring harness
- az8285w000105h Retrofit Fleetboard Telematics platform main wiring harness
- az8285w000105m Retrofit Fleetboard Telematics platform main wiring harness
- az8285w000105n Retrofit Fleetboard Telematics platform main wiring harness
- az8285w000107g Electrical connection diagram for Fleetboard telematics when retrofitting
- az8285w000114h Retrofitting multifunction antenna
- az8285w100011a Enabling the FleetBoard telematics platform in the vehicle
- az8285w100013a Retrofit double DIN slot
- az8285w200503a Retrofit FleetBoard DispoPilot wiring harness
- az8285w200504a Prepare FleetBoard DispoPilot for installation
- az8285w200505a Connect and install FleetBoard DispoPilot
- az8285w200601j Connect and install FleetBoard vehicle computer
- of8285w300002a FleetBoard initial startup, form