Spot weld cutter
201 589 00 51 00
Commercially available tools
Number | Designation | |
WH58.30-Z-1006-01A | Vario Drill WS 91 spot weld removing tool | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1024-04A | Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm) |
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1004-03A | Body saw (electric/pneumatic) |
P63.50-0536-09
1 Expose weld spots and mill off. After this, cut rear fender along broken lines with body saw.
2 Take off damaged rear fender.
Depending on extent of the damage, it is possible to choose between repair method 1 and 2. The new part should be prepared according to the repair method.
P63.50-0543-06
3 Grind connection surfaces in the checked areas metallic bright. Grind spot flanges on both sides metallic bright. Coat insides of the spot flanges with zinc dust paint.