Remove/install detachable parts for replacing rear side wall paneling

AR60.00-D-0055TS

Remove/install detachable parts for replacing rear side wall paneling

15.01.2020

Model

907.6/7, 910.6

Modification notes

19.12.2019

Method extended

Operation step 25

Shown on model 907.733 with code T16 (right sliding door), right side of vehicle

Shown on model 907.7 with code W16 (front left window fixed in side wall/sliding door), with code W34 (rear left sliding window), with code V21 (Luxury interior trim), with code VK8 (plastic floor covering), and with passenger bench seat (8), left side of the vehicle

6

Front side wall trim

8

Passenger bench seat

11

D-pillar paneling

7

Rear side wall trim

9

Load compartment floor

17

Bonded side window

Shown on model 907 with code P48 (Rear mud flap), left side of the vehicle

12

Dirt trap

13

Bolts

14

Nuts

Shown on model 907.6 except code W16 (front left window fixed in side wall/sliding door) and except code W18 (front lh sliding window in side wall/sliding door) and except code W27 (rear left fixed window) and except code W34 (rear left sliding window) and except code IR6 (wheelbase 4,325 mm, overhang 1,615 mm) and except code IR7 (wheelbase 4,325 mm, overhang 2,015 mm), left side of vehicle

16

Electrical wiring harness

 Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.Model 910.6 with engine 780.703

AS00.00-Z-0035-01A

 Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Topical note

Notes on battery

Model 910.6 with engine 780.703

AH54.10-P-0001-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Remove respective protective strips.

AR88.80-D-1040TS

2

Remove respective rear lamp unit.

AR82.10-D-4731TS

3

Remove respective rear wheel.

AR40.10-D-1100TS

4

Remove respective mud flap (12).

Model 907.6/7, 910.6
with code P48 (Mud flaps, rear)

 For this purpose, remove screws (13) and remove nuts (14).

5

Remove respective bonded center side window (17).

Model 907.6/7 with code IR6 (wheelbase 4,325 mm, overhang 1,615 mm) or with code IR7 (wheelbase 4,325 mm, overhang 2,015 mm) with a window in the center in side wall

AR67.30-D-2400TS

6

Remove respective bonded rear side window (17).

Model 907.6/7 with one window in the rear side wall

AR67.30-D-2400TS

7

Remove spare wheel in load compartment.

Model 910.6
with code R87 (Spare wheel/spare wheel rim)
with code RG8 (Tyres 225/75 R16 C)
If left side of vehicle is damaged.

 See the operator's manual for the vehicle.

8

Remove respective wheel well trim.

Model 907.6, 910.6
with code V52 (Load-supporting wheel well)

AR68.30-D-0016TS

9

Remove respective passenger bench seat (8).

Model 907.6/7 with passenger bench seat

AR91.21-D-4425TS

10

Remove upper trim from partition.

Model 907.6, 910.6 with partition wall and with code VA3 (load compartment interior trim up to roof height, washable)

AR68.30-D-1407TS

11

Remove lower trim from partition.

Model 907.6, 910.6 with partition wall and with code VA3 (load compartment interior trim up to roof height, washable)

AR68.30-D-1408TS

12

Remove respective side load compartment trim.

Model 907.6, 910.6 with code V25 (Load compartment trim up to belt rail, simple) or with code VA1 (Load compartment trim up to belt rail, standard) or with code VA2 (Load compartment interior trim up to roof height (wood)) or with code VA3 (Load compartment interior trim up to roof height, can be washed)

AR68.30-D-1185TS

13

Remove respective front side wall trim (6).

Model 907.6
with code V21 (Interior panelling luxury)
Model 907.7

AR68.30-D-1209TSR

14

Remove respective center side wall trim.

Model 907.6
with code IR6 (Wheelbase 4325 mm, overhang 1615 mm)
with code V21 (Interior panelling luxury)
Model 907.6
with code IR7 (Wheelbase 4325 mm, overhang 2015 mm)
with code V21 (Interior panelling luxury)
Model 907.7
with code IR6 (Wheelbase 4325 mm, overhang 1615 mm)
Model 907.7
with code IR7 (Wheelbase 4325 mm, overhang 2015 mm)

AR68.30-D-1211TSR

15

Remove respective rear side wall trim (7).

Model 907.6
with code V21 (Interior panelling luxury)
Model 907.7

AR68.30-D-1208TSR

16

Remove respective cable duct of the electrical wiring harness (16).

Model 907.6/7, 910.6
with code V94 (Cable duct on side wall)

17

Remove respective electrical wiring harness (16) in the repair area and position outside of the working area.

18

Remove respective D-pillar trim (11).

Model 907.6/7

AR68.30-D-4497TSR

19

Remove center roof lining.

Model 907.6/7
with code V36 (Panelling under roof)

AR68.30-D-7609TSR

20

Remove rear center roof lining.

Model 907.6/7
with code V36 (Panelling under roof)

AR68.30-D-7612TSR

21

Remove rear roof lining.

Model 907.6/7
with code V36 (Panelling under roof)

AR68.30-D-7608TSR

22

Remove tie-down rail from side wall.

Model 907.6, 910.6 with code V42 (Side wall tie-down rails at belt rail) and/or with code VC4 (Side wall tie-down rails at roof frame)

AR68.50-D-8250TS

23

Remove load compartment floor (9).

Model 907.6, 910.6
with code VK8 (Floor covering, plastic)
except code V43 (Wood flooring)

AR68.80-D-5800TSF

Model 907.6, 910.6
with code V43 (Wood flooring)
except code VK8 (Floor covering, plastic)

AR68.80-D-5800TSR

24

Remove respective underfloor paneling.

Model 907.6/7
with code XM1 (Noise reduction)
Model 910.6 with engine 651
with code XM1 (Noise reduction)
Model 910.6 with engine 780.703

AR61.30-D-1001TS

25

Remove respective underfloor paneling at high-voltage battery carrier.

* Applies to Europe only

Model 910.6 with engine 780.703

AR61.30-D-1002TE

26

Install in the reverse order.