Partially remove/install detachable parts for replacing lower part of door frame paneling

AR60.00-D-0051TS

Partially remove/install detachable parts for replacing lower part of door frame paneling

15.01.2020

Model

907, 910

Modification notes

19.12.2019

Method extended

Operation step 10

Shown on model 910.6, left side of vehicle

Shown on left side of vehicle

2

Frame seal

 Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.Model 910.6 with engine 780.703

AS00.00-Z-0035-01A

 Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Topical note

Notes on battery

Model 910.6 with engine 780.703

AH54.10-P-0001-01A

Topical note

General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment

Model 910.6 with engine 780.703

AH00.00-Z-0300-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Remove respective hinge of front door.

AR72.10-D-2662TS

2

Remove respective front door sill trim.

AR68.30-D-1306TS

3

Remove respective sealing frame (2) in the repair area and position outside the working area.

4

Remove respective front fender.

AR88.10-D-1005TS

5

Remove respective lower front fender.

AR88.10-D-0002TS

6

Remove respective front wheel.

AR40.10-D-1100TS

7

Remove respective rear section of front fender liner.

AR88.10-D-1321TS

8

Remove respective front floor covering.

Model 907

AR68.80-D-0006TSR

Model 910

AR68.80-D-0006TSF

9

Remove respective underfloor paneling.

Model 907
with code XM1 (Noise reduction)
Model 910 with engine 651
with code XM1 (Noise reduction)
Model 910.6 with engine 780.703

AR61.30-D-1001TS

10

Remove respective underfloor paneling on high-voltage battery carrier.

* Applies to Europe only

Model 910.6 with engine 780.703

AR61.30-D-1002TE

11

Install in the reverse order.