ar4010d1090a

Temporary tire sealing

Type ar · topic 40.10 · version 0203 · 2019-02-05

Applies to: Model 415, 447, 639, 906, 907, 909, 910

Where it sits

Function group 2 Chassis › 40 Wheels, chassis alignment check › 40.10 Wheels, tires — Series 415 · Series 447 · Series 639 · Series 906 · Series 907 · Series 909 · Series 910

EinPAS 20 Chassis › 20.30 Wheel/tire › 20.30.30 Wheel/tire/spare wheel — Series 415 · Series 447 · Series 639 · Series 906 · Series 907 · Series 909 · Series 910

AR40.10-D-1090A

Temporary tire sealing

04.02.2019

Model

415, 447, 639, 906, 907, 909, 910

Temporary tire sealing

1

"Special Cement BL"

2

Hand milling cutter

3

Chalk

4

Seal body

5

Awl

6

Knife

7

Milling cutter

8

Installation instructions

9

Adhesive label

D40.10-1128-05

Temporary tire sealing

2

Hand milling cutter

5

Awl

S40.10-4539-05

Topical note

Notes on temporary tire sealing

Model 415, 447, 639, 906, 907, 909, 910

AH40.10-P-1090-01A

Check

1

Check general condition of tire


In event of damage to side wall or outside the repair area, provisional sealing may not be used.
Otherwise, the tire function cannot be ensured.

2

Search for point of damage on tire and mark with chalk (3)

If no point of damage can be found, it is not possible to make a provisional seal. The search can also be performed on a removed wheel and tire assembly.

Leakage detection spray for USA

*BR00.45-Z-1004-03A

Leak detection spray

*BR00.45-Z-1002-03A

Temporary tire sealing

*BR00.45-Z-1021-08A

If necessary

Remove affected wheel and tire assembly.


Model 415

AR40.10-S-1100C


Model 447

AR40.10-S-1100E


Model 639

AR40.10-S-1100S


Model 906

AR40.10-D-1100H


Model 907, 910

AR40.10-D-1100TS


Model 909

AR40.10-D-1100F

3

Remove the object that caused the damage from the tire

4

Check course, size and position of hole orifice at damage point


Hole orifices outside the specified repair area and with a diameter of over 6 mm must not be repaired.
Otherwise complete sealing of the hole orifice cannot be assured.

Provisionally seal

5

Screw hand milling cutter (2) in clockwise direction several times into and out of damage point's hole orifice

The hole orifice is cleaned here.

Temporary tire sealing

*BR00.45-Z-1021-08A

6

Hook sealing body (4) into awl (5) and pull firmly in downward direction toward end of eyelet

Insert awl (5) with eyelet opening upwards through the sealing body (4).

Temporary tire sealing

*BR00.45-Z-1021-08A

7

Release flipper handle on awl (5) by applying thumb pressure to the mounting frame bow and then open up to end stop

Temporary tire sealing

*BR00.45-Z-1021-08A

8

Hook sealing body (4) into clamping hook of awl (5) and close flipper handle until it latches into place


Check the sealing body (4) for cracks.
The sealing body (4) must not exhibit any cracks.

Temporary tire sealing

*BR00.45-Z-1021-08A

9

Immerse closed awl (5) with clamped sealing body (4) into "Special Cement BL" (1)

Temporary tire sealing

*BR00.45-Z-1021-08A

10

Feed awl (5) with clamped sealing body (4) in hole orifice up to end stop


The awl (5) must not be twisted when the sealing body (4) is inserted.
Otherwise firm seating of the sealing body (4) cannot be assured.

Temporary tire sealing

*BR00.45-Z-1021-08A

11

Cut off protruding end of sealing body (4) using knife (6) flush at the tread

Temporary tire sealing

*BR00.45-Z-1021-08A

Check

12

Correct tire pressure of wheel and tire assembly to meet manufacturer's specifications

13

Check point of damage for leak tightness


It must be ensured that the point of damage is leak tight.
Otherwise the road safety of the vehicle cannot be guaranteed.

Leakage detection spray for USA

*BR00.45-Z-1004-03A

Leak detection spray

*BR00.45-Z-1002-03A

14

Install affected wheel and tire assembly

If affected wheel and tire assembly was removed.

Model 415

AR40.10-S-1100C

Model 447

AR40.10-S-1100E

Model 639

AR40.10-S-1100S

Model 906

AR40.10-D-1100H

Model 907, 910

AR40.10-D-1100TS

Model 909

AR40.10-D-1100F

15

Attach adhesive label (9) within driver's field of view

Temporary tire sealing

*BR00.45-Z-1021-08A

16

Document "Provisional tire repair" roadside assistance on "Service 24 h Repair Order - Mercedes­Benz and smart" form and have customer sign it

Repair materials

Number

Designation

Order number

BR00.45-Z-1002-03A

Leak detection spray

Christof Fischer GmbH
www.kaeltefischer.de

BR00.45-Z-1004-03A

Leakage detection spray for USA

LIQUI MOLY
www.liqui-moly.com

BR00.45-Z-1021-08A

Temporary tire sealing

REMA TIP TOP AG
Order no.: 5103610
Order no.: 5103710
http://www.rema-tiptop.de

Referenced documents