ar0840p0014eq

Replace lower rpm sensor on rear axle drive module

Type ar · topic 08.40 · version 0200 · 2020-03-12

Applies to: Model 293

Where it sits

Function group 1 Engine › 08 Electric drive, hybrid drive › 08.40 Sensors — Series 293

EinPAS 15 Engine › 15.50 Electric drive/hybrid drive › 15.50.12 Sensor/switch/wiring harness — Series 293

AR08.40-P-0014EQ

Replace lower rpm sensor on rear axle drive module

06.03.2020

Model

293

Replace lower rpm sensor on rear axle drive module

1

Screw

2

Electrical connector

L20/1

Electric machine rotor rpm sensor 1

P08.40-A009-12

Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

Topical note

General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment

AH00.00-Z-0300-01A

Notes on safety-relevant components

AH00.00-Z-0019-01A

Remove/install

1

Drain rear axle differential oil.

AR35.31-P-0523EQ

2

Disconnect electrical connection (2).

3

Clean area around electric machine rotor rpm sensor 1 (L20/1).

Assembly cleaner

*BR00.45-Z-1028-04A

4

Remove screw (1).

5

Take out electric machine rotor rpm sensor 1 (L20/1)

6

Install in the reverse order.

Repair materials

Number

Designation

Order number

BR00.45-Z-1028-04A

Assembly cleaner

A 000 986 56 01

Referenced documents