GF07.61-P-3031F | Correction programming function | 10.7.96 |
ENGINE 104.941 as of 1.6.96
ENGINE 104.943 /944 /991 /994 as of 1.6.95
ENGINE 104.945/ 995
ENGINE 111.921 /943 /944 /947 /951 /952 /955 /956 /957 /958 /973 /975 /977 /982 /983
ENGINE 111.945 /961 /974 as of 1.8.96
ENGINE 111.970 as of 1.5.96
ENGINE 111.942 as of 1.9.98
ENGINE 111.946 as of 1.6.98
ENGINE 112.910 /911 /912 /913 /914 /916 /917 /920 /921 /922 /923 /940 /941 /942 /943 /944 /946 /947 /949 /953 /954 /955 /970 /972 /973 /975
ENGINE 113.940 /941 /942 /943 /948 /960 /961 /963 /965 /966 /967 /968 /969
ENGINE 119.980 /981 /982 /985
ENGINE 120.982/ 983
ENGINE 137.970
ENGINE 166.940 /960 /990 /995
ENGINE 166.960 with CODE (922) Power-reduced
15.03.07 | The document has been updated to this date and will no longer be subject to revision. |
P07.61-2558-05
087 Hand-Held Tester HHT or STAR DIAGNOSIS
094 Multiplex cable
K1/6 Electronics relay (model 168)
K40 Relay module (model 170, 210 up to 2/97)
K40/4 Fuse and relay module (model 202, 208, 230, 210 as of 2/97, model 163 with designation F1, model 215, 220 with
designation K40/7)
N3/4 HFM-SFI [HFM] control unit
N3/5 ECM control unit (up to 08/01)
N3/10 ME-SFI control unit
N3/18 ECM control unit with throttle valve actuator (as of 09/01)
N16/1 Base module (model 129, 140)
X11/4 Data link connector
CAN Data bus
With the correction programming it is possible to activate
different maps of the engine management system in the engine control unit.
The coding is performed with the Hand-Held Tester (HHT) or with STAR DIAGNOSIS. The following maps can be influenced:
Ignition maps for adapting to different fuel quality (except )
Mixture maps for enriching the fuel/air mixture in different operating states
(except )
Idle speed on automatic transmission and engaged selector lever position
CO setting on models without TWC (except )
Fault setting conditions for rendering smooth operation identification less sensitive
Cylinder shutoff threshold
(on engines fitted with cylinder shutoff)
Motor electronics control unit, location/task/design/function | other than engine 111 EVO | ||
Engine 111 EVO | |||
HFM-SFI control unit, location/task/design/function | Engine 104, 111 HFM-SFI | ||
ECM control unit, location/task/design/function | Engine 166 up to 08/01 (hot film mass air flow sensor and intake air temperature sensor integrated) | ||
Engine 166 as of 09/01 (throttle valve actuator integrated) |